give me detailed answer regarding this particular question
2006-09-03 07:04:41 · 1 answers · asked by rose s 1 in Science & Mathematics ➔ Engineering
Here is a great place to find information on many different bearing systems including sleeve bearings
http://en.wikipedia.org/wiki/Bearing_%28mechanical%29
2006-09-04 08:27:36 · answer #1 · answered by will1green 1 · 0⤊ 0⤋
Plastic Sleeve Bearings
2016-11-08 05:55:00 · answer #2 · answered by lonston 4 · 0⤊ 0⤋
What Is A Sleeve Bearing
2016-12-29 19:10:51 · answer #3 · answered by Anonymous · 0⤊ 0⤋
For the best answers, search on this site https://shorturl.im/ax8s0
A journal bearing is also called a sleeve bearing because it consists of a sleeve that encloses a portion of the shaft. It relies on a film of oil to support the shaft and permit shaft to rotate within the sleeve. Unlike an antifriction bearing (ball or roller type) A journal bearing tends to generate a good bit of heat and needs a method to keep cool either by radiation or a circulating system using a coolant. The oil film also needs a method to maintain sufficient oil to keep the oil film from breaking down.
2016-04-07 00:05:42 · answer #4 · answered by Anonymous · 0⤊ 0⤋
A sleeve bearing is the simplest bearing you can imagine. A rotating shaft fits inside a hollow cylinder (sleeve) that does not rotate and provides support for the transverse bearing load. The sleeve may be plastic or metal (in earlier times there were wooden bearings), and may be dry, periodically lubricated, or permanently lubricated as some sintered metal bearings are. Typically the sleeve is a softer material than the shaft (e.g., a plastic or bronze sleeve around a steel shaft) and it may be replaceable. If lubricated, it may be slotted in such a way as to recirculate the lubricant and ensure its distribution over the entire contact surface. Teflon sleeves are found in some light-duty applications where lubrication is inconvenient. Sleeve bearings are used in numerous products: fans, electric and fueled motors, power tools, and appliances, to name a few. They are also referred to as journal bearings. See the ref. for an interesting article on sleeve bearing lubrication.
2006-09-03 07:18:23 · answer #5 · answered by kirchwey 7 · 3⤊ 0⤋
Looking for a good answer on this too
2016-08-08 14:09:46 · answer #6 · answered by Anonymous · 0⤊ 0⤋
Usually they are press-fits or heat-shrink fits. In this case, it would more likely be a chill-shrink fit.
2016-03-16 03:41:18 · answer #7 · answered by Anonymous · 0⤊ 0⤋
thx for the answers everyone xx
2016-08-23 06:03:53 · answer #8 · answered by chanda 4 · 0⤊ 0⤋