superchip installed,set back to stock still on power cel still on
2006-09-03 03:41:20 · 2 answers · asked by rrlegg@sbcglobal.net 1 in Cars & Transportation ➔ Car Makes ➔ Ford
did you try undoing the battery connection to reset the computer? or take it into autozone to have them clear the code for you? a lot of these tuner chips kinda screw with the ecm sometimes and i am sure you probably just got a false signal and thats what set of the light. you just need to reset it and see if it comes back. If it comes back, well then you may have yourself a bonafide problem
2006-09-03 06:19:21 · answer #1 · answered by smallblockford1000 3 · 0⤊ 0⤋
The chip will always set that code. More likley you have a valve cover shorted out. Remove the oil cap and smell to see if you smell burnt wiring. You will need to replace the gasket and 2 short harness under it. Also replace the glow plugs while you are in there. The glow plugs sometimes go bad and cause the wiring to get hot and burn the wires. You can unplug the connectors one at a time to find the side it is on. But I would do both sides.
2006-09-03 06:25:56 · answer #2 · answered by Josh S 7 · 0⤊ 0⤋