compact florescent don't burn that hot.
You can also try lower watage spot lights
2006-09-02 15:44:44
·
answer #1
·
answered by Bill 6
·
0⤊
0⤋
I have a solution!
If you put the whole circuit on dimmer switches, you can turn the intensity of the lights down just a tad. It won't take much. You won't notice much difference in the lighting but you'll get 10 times the life out of the bulbs. Considering that dimmer switches aren't a whole lot more than recessed lighting bulbs, it's a value within a year. ALSO.....make sure you are using reflector or spotlighter bulbs in the receptacles. NEVER use the regular ones, unless you're trying to burn down your house.
2006-09-02 22:49:25
·
answer #2
·
answered by Anonymous
·
1⤊
0⤋
If they are turning off because they are too hot, perhaps the wattage is higher than the fixture allows. That is a little worrisome. There are newer bulbs that are a florescent which are cool to the touch, use less electric, but many interfere with some electronics. Read the labels for your specific need.
2006-09-02 22:48:10
·
answer #3
·
answered by KMarie 1
·
0⤊
0⤋
The screwin flourescents are GREAT! Not hot, long lasting and use less electric so the costs less to run. The initial cost may be higher than a normal bulb, but in the long run you get a great return for your money in lower electric usage, longer life (up to 5 years or more) and less heat to kick that A/C on. I had one that went throught three moves over 8 years and it just blew out. For the $5-something I paid, I think I got a great return. I love mine. They are bright --- and cool.
2006-09-02 23:04:55
·
answer #4
·
answered by momkat 2
·
0⤊
0⤋
There are new florescent lights that will replace the standard bulb and produce less heat. They also produce more light with less wattage. They may cost a bit more but they last much longer
2006-09-02 23:36:02
·
answer #5
·
answered by Bob G 1
·
0⤊
0⤋
use a lower wattage bulb or take off the light switch from the wall and replace it with a dimmer switch,,they're exactly the same size as a light switch.
2006-09-02 22:47:41
·
answer #6
·
answered by steve 5
·
0⤊
0⤋
Maybe the wattage of the bulbs you are using is too high for the rating of the fixtures.
2006-09-02 22:44:50
·
answer #7
·
answered by Darby 7
·
0⤊
0⤋
Flourescent bulbs would be cooler if you can find a configuration that fits. If you can find an LED bulb, which they now make to replace incandesant bulbs, it would be much much cooler, almost no heat.
2006-09-02 22:44:49
·
answer #8
·
answered by Anonymous
·
0⤊
0⤋
Compact fluorescents burn cooler. Another helper is a small Vornado fan to circulate room air. Aim it up.
2006-09-03 00:58:50
·
answer #9
·
answered by a_phantoms_rose 7
·
0⤊
0⤋
lower wattage bulbs, such as 40 watt or even 20 watt, if you can find them. also, lights that are tinted white, rather than clear, do not burn as hot.
^_^
2006-09-02 22:49:16
·
answer #10
·
answered by miss advice 4
·
0⤊
0⤋