hello? owners manual.
2006-09-02 13:47:16
·
answer #1
·
answered by Skanky McSkankypants 6
·
0⤊
0⤋
Well most of the time auto makers would put fuse diagam on the back of the fuse box cover but lately they dont so if that does not work try your owners manaul ( if you have it ) that does not work you can take a test light turn your ing. on and check all the fuses both sides for power ( they should almost all have power when ing is turn on * do not crank * ok there will be a few not many that dont that should norrow it down for you
2006-09-02 14:26:17
·
answer #2
·
answered by colemanrimmer 1
·
0⤊
0⤋
Look for a cover that has "fuses" on it.
I don't know where it is on the Wrangler.
Inside it should have a picture or diagram of where each fuse is located. Be certain to replace it with the same amp rating or you could do serious damage to some elecrtical things.
2006-09-03 16:58:50
·
answer #3
·
answered by nightrider 4
·
0⤊
0⤋
Look for the fuse box diagram in your owners manual
2006-09-02 13:47:16
·
answer #4
·
answered by Brenda the B 1
·
0⤊
0⤋
if it doesn't say on the fuse box cover go to the owners manuel. lots of times the fuses go for alot of differant things. no owners manual? get one, you're going to need it.
2006-09-02 13:50:21
·
answer #5
·
answered by La-z Ike 4
·
0⤊
0⤋
Fusebox should be labeled? Or it coud be the in line fuse if it's an aftermarket radio? Good Luck!! ?:)~
2006-09-02 14:46:31
·
answer #6
·
answered by PaPa Norm 6
·
0⤊
0⤋
Open a fuse box, it should be on the back of the lid. :)
2006-09-02 13:46:18
·
answer #7
·
answered by Просто Я 3
·
1⤊
0⤋
By looking it up in the Chiltons manual.
2006-09-02 13:46:23
·
answer #8
·
answered by Curly 6
·
0⤊
0⤋