it only slips in first gear, i've changed the filter and no change!
2006-09-02 13:20:52 · 10 answers · asked by true3fan420 1 in Cars & Transportation ➔ Car Audio
No a bad motor mount cannot cause trans slippage if it is slipping in 1st gear possibly the 1st gear bands or clutch pack is going out or there could also be trash stuck in the valve body stopping up the valve that controls ist gear if the clutch pack isn't getting the proper pressure to ingage it will cause slipping if your not experienced with automatic transmissions bring it to a professional
2006-09-02 13:28:54 · answer #1 · answered by davecat350 4 · 0⤊ 0⤋
That is not likely. There are seperate clutch mechanisms for each gear and I fear your first gear clutch is going out. Be real gentle with it until you can get it fixed. Some transmissions will let you start in 2. Try that to see if yours is one and that will take some of the stress off your first gear until you can get it fixed.
Find a shop that has recommendations. Ask around your friends to learn if they have taken transmissions for repairs. Former customers are the best source of truth when it comes to auto repairs.
Good luck
2006-09-02 13:46:55 · answer #2 · answered by Harley Charley 5 · 0⤊ 0⤋
no it will not, it will only cause your engine to move more than usual, causeing some rocking or movement when at idle and alot more when you press the gas... check your tranny fluid and maybe change your tranny filter... if that doesnt work you might need to get a new tranny or have that one rebuilt
2006-09-02 13:24:45 · answer #3 · answered by penguin 4 · 0⤊ 0⤋
i have not in any respect heard of cv joints causing tranny issues, yet you've even were given a damaged engine mount! CV joints + damaged engine mounts + undesirable transmission = commerce it in even as you nevertheless can!
2016-12-06 04:35:39 · answer #4 · answered by akana 4 · 0⤊ 0⤋
no,,a bad mount wont cause it to slip,,i own a repair shop,,and i do this kind of work all the time,,and i can assure you it don't have anything to do with it slipping,,it may be low on fluid,,if not it may be going out on it,,you might want to take it to a repair shop,,and see what they say about it,,good luck with it,,i hope this help,s.
2006-09-02 13:27:08 · answer #5 · answered by dodge man 7 · 0⤊ 0⤋
No it won't, you may change your filter and screen in the tranny.
2006-09-02 13:31:54 · answer #6 · answered by nbr660 6 · 0⤊ 0⤋
no it wont sounds as though the cones in the gearbox have gone get a new 1 or hve it recond
2006-09-02 13:27:35 · answer #7 · answered by hairyjohnboy 1 · 0⤊ 0⤋
no but it may cause it to break in half, " For Real" I think you probably have transmission problems also
2006-09-02 13:30:30 · answer #8 · answered by jp#5 3 · 0⤊ 0⤋
No
2006-09-02 13:42:28 · answer #9 · answered by crider992000 2 · 0⤊ 0⤋
sounds serious, sam.
2006-09-02 13:26:39 · answer #10 · answered by Anonymous · 0⤊ 0⤋