an electric fan
a light
1 kg meat-many different meats can be used -if you do not have access to ostrich, game etc then try a cut of beef like eye of the round or flank(my favourite)
some vinegar
less than a table spoon of course salt (or Kosher salt)
1/4 cup of brown sugar
1/2 cup of coriander (whole)(get it at a bulk food store)
1/2 teaspoon pepper
string
just to be extra square you also need a good knife, fridge, electricity, scissors, a couple of bowls, some nails or hooks, a hammer and someone to make fun of you for trying to maintain your South African heritage. A couple other ingredients that I have never used but you may wish to use are bicarbonate of soda (apparently to prevent mold setting in) and saltpetre which acts as a preservative and gives the biltong a bright red colour.
INSTRUCTIONS
Wash the meat.
Cut the meat at an angle against the grain into about one inch strips.
Sprinkle vinegar over the meat
Place the coriander in a bag and lightly crush the whole coriander so that the effect of the coriander will be greater.
Make the "biltong mix" by combining the course salt, brown sugar, coriander, black pepper.
Dip the meat into the "biltong mix" until all the mix is used up.
Place the meat in a tray for a few hours, or over night, in the fridge.
After a few hours dump any blood that has seeped out of the meat.
Dip the biltong quickly into a water/vinegar mixture to remove surface salt.
Hang the biltong by making a very small incission through the slice of meat with a knife about an inch from the end of the meat.
Cut the string into about 10 inch strips which are placed through the meat and tied to form a loop.
Hang the biltong in a place not to far from an electrical outlet by taking the loop of string and place it on the hook or nail or hangar or whatever device you have created to suspend the meat.
To dry the meat turn on the light(regular light bulb) and the fan and leave for about 4-7 days depending on humidity, temperature and taste.
2006-09-01 22:49:55
·
answer #1
·
answered by Auntiem115 6
·
0⤊
0⤋
I use the smoked venison, beef, buffalo and elk jerky I make as an ingredient in my pemmican. Rather than the traditional 50-50 meat and suet pemmican, I make mine from equal quantities of jerky, dried fruit and nuts, coarsely ground and held together with a little honey. It makes a high protein high energy trail mix bar. My favorite is buffalo jerky, sunflower seeds and dried cherries. RScott
2016-03-17 06:31:22
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
There are a multitude of recipes and methods used today to make biltong. Many of these are passed down from generation to generation. The good news is that it is really simple to make your own biltong, and the principles which you will use are basically the same regardless of which recipe or method you choose to adopt. One thing is sure, like many other recipes, the best biltong is made with the best ingredients.
Meat Selection
As mentioned above, In the past farmers used a whole beef carcass for Biltong, but today the beef buttock - consisting of the silverside, topside and thick flank is normally used. The finest biltong is made from the eye muscles running down both sides of the backbone and which are cut whole from a side of beef. The most tender (and most expensive) biltong is made from the fillet.
If you live in America, the best cuts I have found to make biltong, include London Broil, Eye of Round and Top Round.
Bottom line: Use the best meat you can afford. The cheaper cuts of meat often contain an excess amount of sinew, collagen and binding tissue which will yield an often tough and ‘stringy’ produce.
Method
The meat must firstly be cut into strips. A few things should be noted at this point:
Meat must be cut with the grain. This is because when you come to eat the final product you will cut the biltong across the grain (and tough tissue), in order to get the most tender pieces.
Meat will shrink by a large amount during the drying process. The more dry you like your biltong the more it will shrink, due to moisture loss from the strips of meat. You can roughly estimate that your end product, will yield approximately 50% of your starting weight.
In cool, dry climates, your initial strips of meat can be cut fairly thick, and of any length. In warm, moist climates, your initial strips of meat should be cut thinner. This is because the thicker the strip of meat, the longer it will take to dry out, and the more likely the meat is to spoil during the drying process.
Try to remove as much sinew and binding tissue as possible when you cut your strips of meat.
The strips of meat are then dipped into undiluted vinegar. Use red, white, or even apple cider vinegar. The vinegar ‘bath’ accomplishes a few things: It dissolves some of the sinew and binding tissue. It makes the meat a little more tender. It mellows the aroma and flavor of the meat, before and during the drying process. It causes the meat to have a dark and shiny appearance once it is dried. It opens up the pores of the raw meat, for the next step, which is to spice the meat. By doing so, the spices are able to penetrate deeper into the meat.
At this point you are ready to season your meat, and this is the step that typically distinguishes one type of biltong from another. Most people develop their own recipes for the seasoning they use on their biltong. These recipes are often passed down from generation to generation. As far as traditional biltong is concerned, you will typically see the following ingredients used in a seasoning: Salt, Pepper, Sugar, and Coarsely Ground Dry or Roasted Coriander
Coriander in my opinion is one of the seasoning which really identify with good biltong. Roasted Coriander in particular lends a wonderful flavor to your final product. In order to roast your coriander, place dried coriander seeds in a dry pan over medium heat and stir the seeds around the pan. The seeds will give off a strong aroma and will turn a golden brown color. At this point you should remove the seeds and coarsely crush them.
Some recipes call for ‘salpetre’. This is a chemical similar to sodium nitrate or potassium nitrate and is used to cure the meat and help prevent mildew from occurring during the drying process in moist conditions. The ‘salpetre’ also gives the meat a nice rosy color once it has dried. Please note that health experts are now warning that such nitrates may significantly increase the risk of cancer in humans. So you might want to take this into consideration before using nitrates.
Of course you can be as creative as you like at this point and as an example, use seasonings such as dried chilies, granulated garlic and Worcestershire sauce.
Once you have seasoned your meat, we recommend placing it into a large ice chest overnight, and allowing it to absorb the flavors of the vinegar and seasoning, before you hang it up to dry.
The following is a seasoning recipe, which we use, and is good for seasoning about 12 ½ kilograms of meat strips:
560 g fine salt
125 ml brown sugar
25 ml bicarbonate of soda (helps to make the biltong tender)
10 ml salpetre (optional)
12.5 ml ground black pepper
125 ml coarsely ground coriander
Drying
There are many different ways of drying your biltong. In the old days, the South African farmers made little s-shaped hooks out of steel wire. These would be run through one end of the meat strips, and hooked around wires stretched along the beams of a house, or even the branches of a tree.
Today the little s-shaped hooks are commercially available (if you live in South Africa), but most people use ordinary metal paperclips which can be bent back to resemble s-shaped hooks. Paperclips are also cheap and plentiful and can be thrown away when your meat is dried. Some people also loop a piece of string through one end of the meat, which is used to hang the biltong to some kind of hook.
The ideal conditions for drying your biltong are in a breezy place, away from direct sunlight, but well-lighted, in order to prevent mildew. Make sure that you keep it away from ants, rats, insects, pets and greedy humans, who insist on ‘sampling’ the biltong before it’s time ! Honest, good upstanding citizens have been known to decimate a supply of drying biltong.
The time it takes to dry biltong varies depending on how thick your meat slices are, what type of conditions you have in the place you are drying your biltong, and the method you chose to dry your biltong. With practice, you will get to know when your biltong is dried to your taste. It is a matter of personal preference, how ‘wet’ or ‘dry’ you like your biltong. Typically it should be hard on the outside, but a little moist and red on the inside. With time, you will learn to squeeze the biltong between your fingers, and use the sponginess of the biltong as your guide. Alternatively you can hack into it with a knife to see exactly how moist it is !
There are again many different methods people use to dry biltong. We will address three of these methods specifically.
Using a home-made enclosed cabinet with screen mesh sides. The cabinet has metal rods that run across the width of the cabinet, and which are used to hang the biltong from (much the same as you would hang your clothes in a clothing closet). The screen mesh allows a breeze to pass through the biltong (using an oscillating fan, as we do, you can create this breeze). The fact that the cabinet is enclosed, keeps out all the ‘bad elements’ mentioned above.
Using a home-made ‘Biltong box’. This is basically a sealed wooden box (you can use cardboard if you like). The bottom of the box houses a 60w light bulb, which is covered by a piece of wood, that acts as a barrier to separate the meat drying portion of the box from the light housing. The barrier has holes cut into it, that allow the heat from the light bulb to travel upwards and at the same time prevents the light bulb from having the juices from the drying meat drip on it. The small amount of heat helps to dry the biltong faster. The meat drying portion of the ‘Biltong Box’ must have holes in the top and preferably on all sides, which promote good air circulation.
Using a commercially purchased jerky dehydrator.
Storage Of Your Biltong
There are only a few reasons why you would have left-over biltong that needs to be stored:
Your biltong did not turn out very well.
You do not have enough friends.
If you do need to store you biltong you can do so using the following guidelines:
1 Week
Store at room temperature in a cool, dry area in a sealed plastic container or Ziploc bag. You can also use a paper bag but this will cause the jerky to dry out more.
Several Weeks
Store in a sealed plastic container or Ziploc bag, and refrigerate 32 -38 degrees F.
1 Year
Store in a sealed plastic container or Ziploc bag, and preferably vacuum seal, then freeze.
What To Do with Biltong
Biltong is often carved into thin slices, and sometimes served whole in the form of sticks. Sometimes biltong is left until utterly dry, when it can be grated into a powder.
Following are a few recipes which will get you started with some ideas on what to do with your biltong.
Biltong Spread
· 125 g smooth cream cheese with chives
· 30 ml mayonnaise
· 30 ml lemon juice
· 60 g grated biltong (125 ml)
· Salt & freshly ground black pepper to taste
Combine all the ingredients and serve sandwiched between slices of bread and toasted in an electric sandwich maker.
Spread on slices of whole-wheat bread and garnished with thin slices of lemon or cucumber.
Spread on bread canapés - cut slices of bread into rounds or fingers, fry in cooking oil until golden brown. Cool on a wire rack then spread with biltong mixture and garnish with sliced olives or gherkins.
Biltong Muffins
· 120 g Whole-wheat flour (250 ml)
· 120 g Cake flour (250 ml)
· 200 g Biltong - finely chopped (500 ml)
· 50 g Cheddar Cheese (125 ml)
· 30 ml Baking powder
· 3 Eggs
· 200 ml Milk
· 100 ml Cooking oil
· 5 ml Salt
· 15 ml Lemon juice
Combine all the ingredients and mix lightly. Spoon into greased muffin pans and bake at 220° C for 11 minutes. Leave to cool slightly before removing and serving with butter.
Makes 12
Biltong Pot bread
DOUGH
· 240 g Cake flour (500 ml)
· 20 ml Baking Powder
· 2 ml Salt
· 5 ml Mustard powder
· 100 g Butter
· Approximately 100 ml Milk
· 1 Egg - beaten
FILLING
· 120 g Ground Biltong (250 ml)
· 200 g Smooth cottage cheese
· 30 ml Chopped parsley
· Freshly ground pepper to taste
· Mayonnaise to moisten
· 15 ml Lemon juice
To make the dough sift together the dry ingredients. Cut butter into the flour with a knife and then rub it in with your fingers until the mixture resembles dried breadcrumbs.
Beat the milk and egg together. Make a well in the flour mixture and add the liquid gradually. Mix quickly to a soft dough. Turn out onto a floured board and knead lightly until smooth. Roll out into a square approximately 10mm thick.
To make the filling mix all ingredients together and spread over the dough keeping 25mm clear along the edges. Roll up dough like a Swiss roll and seal the edges with beaten egg and water. Wrap lightly in greaseproof paper and refrigerate for about 30 minutes. Carefully cut the dough into 25mm slices and arrange them - cut side down - on the bottom of a greased No.3 cast iron pot. Begin in the center and arrange the remaining slices in a circle. Leave the sides of the pot clear to allow the dough to rise. Grease the inside of the lid with cooking oil or butter and cover the pot. Put the pot over a small fire - put a few small hot coals on the lid and bake for 20 - 30 minutes until the bread is golden brown and cooked. Turn out - cool slightly - and then serve with crisp vegetable sticks and lettuce leaves.
Serves 6
2006-09-01 22:48:07
·
answer #6
·
answered by Anonymous
·
1⤊
0⤋