The first comment is disappoiting (specially the spelling for an IT dept. employee), but the ladies here more than made up for it.
I figured when u said louder, is as in stereo sound. So i am going to give u my 2 cents:
Good headunit CD player, a 5 channel amp, component speakers up front, 6X9's in the back, two 10" subs in a sealed box. For under a $1000 u can have all that.
2006-08-31 18:11:42
·
answer #1
·
answered by Slacker34 3
·
0⤊
0⤋
you do not bore an engine until it desires it. boring is to straighten and/or index the cylinder partitions, to not boost the cubic inches. Being 35 years previous, the engine will probably want it yet basically measurements can tell. in case you do not understand how, take it to the device save and that they are going to understand the thank you to be certain if it desires boring. and how plenty. in keeping with risk basically .020 and then returned in keeping with risk .one hundred if it is going to stand it. After a stable rebuild, the element you like maximum is a robust set of heads. i think of you have the low compression "peanut port" heads and you're unlikely to make any genuine potential with them no count what the cam is. inspect the intake port. Is it around or oval? Oval is physically powerful, around might desire to get replaced. Then pick a stable sturdy lifter cam and study to regulate valves. Hydraulic lifters do exactly not artwork nicely with the heavy valve practice of a substantial block. Get a 2 airplane intake to bypass with the heads and you'd be waiting to bypass. And, a million - 7/8ths headers are extraordinarily small for a great block. i could recommend 2" tubes a minimum of. you recognize of direction that in case you have the engine bored you will might desire to deploy new pistons and rings? And pay to have them put in on your rods? and of direction you will prefer to have the engine vatted to eliminate the residual metallic shavings which will mean you may desire to have new cam bearings and new freeze plugs put in.
2016-11-23 16:59:20
·
answer #2
·
answered by mccuistion 4
·
0⤊
0⤋
I have a camaro. Why in the world would you want yours to sound louder? Those things are loud enough! I guess you could always put a bunch of siblings in your car, they are always loud!
2006-08-31 16:11:28
·
answer #3
·
answered by ANGELa 3
·
1⤊
0⤋
headers, then put a catbac exhaust system its illegal but if you take your cats off and put test pipe instead of the cats you will gain 15 hp right there because theres less backpressure. i would go to jegs or summitracing.com and look at flowmaster dynamax and hooker catback exhaust systems for cameros they run anywhere from $300 to $900
2006-08-31 16:12:10
·
answer #4
·
answered by Anonymous
·
0⤊
0⤋
i believe the first person's user name says it all... but thats him...
depends on the loud you want... if you mean your stereo... check out www.cardomain.com ... they have great prices on stereo equipment... id you mean like the engine... go for flowmasters... get rid of the cat. converter... if you can do that where you live, and strait pipes if you want just raw loud... but flow masters gives a nice sound also...
2006-08-31 19:23:19
·
answer #5
·
answered by Mike 2
·
0⤊
0⤋
I'm not sure if you want to increase your sound ot you want to beef up your car but i assume its the sound..... The best is to look what budget you have and then go to a sound dealer that also do the fitting of it.......hope you blast that racist ***......l away
2006-08-31 16:12:10
·
answer #6
·
answered by jjtrdx 2
·
1⤊
0⤋
A wrench. Take the muffler off.
2006-08-31 16:15:02
·
answer #7
·
answered by pickitngrin 2
·
0⤊
0⤋
punch a hole in the muffler
turn air cleaner lid upside down and retighten wing nut
2006-08-31 16:10:43
·
answer #8
·
answered by Mopar Muscle Gal 7
·
0⤊
0⤋
get a subwoofer. that's what i use with my computer and it works really awesome and i know they make some for cars too. and don't pay any attention to the jerk who commented above. hopefully your subwoofer will drown him out :)
2006-08-31 16:10:36
·
answer #9
·
answered by mighty_power7 7
·
0⤊
0⤋
A hacksaw to remove your muffler.
2006-08-31 16:10:07
·
answer #10
·
answered by Lee J 4
·
0⤊
0⤋