Hello out there,
quick question for those mechanics out there. I was told today that I need to get both front axles replaced today and was quoted ($300-400, $125 for the part and $40hr for the labor) an amount that when discussed with family said was to high they (my two uncles) told me they were able to get the parts for $60 for both. Although Im not begrudging the labor fee, I do want to know what is the norm for getting this kind of work done on a car? Any helpful opinions would be welcomed. Thank you.
2006-08-31 12:46:34 · 2 answers · asked by flie_1999 2 in Cars & Transportation ➔ Car Makes ➔ Nissan
$125 for each axle, and at a Auto garage can one ask to have the rebuilt axles put in or are the new ones better?
2006-08-31 14:18:53 · update #1
Axles for your car at Advance Auto Parts online are $58 with a $35 core charge which will be refunded when you take the old axles in. You can order them online as well and shipping is free with orders over $50. An axle replacement isn't hard at all for someone with mechanical ability. You can buy a manual which gives you detailed instructions for about $11 at advance and if you have any tools you probably have everything you need. A couple wrenches, ratchet, sockets, and a pry bar. I've never replaced an axle that took over 30 minutes if you have the right tools and the car is up off the ground enough to get to it easily. Garages here charge about $30 per side to replace one unless you go to the dealer where you will pay over $100. Note: Usually if an axle is bad it will make a popping sound when you drive it. If you are going up hill and it starts popping when you turn the wheel left it is the right axle and if it pops when you turn it right it is the left axle. They usually don't both go bad at once so you might save some money by having them checked again.
2006-09-01 00:51:33 · answer #1 · answered by Craig H 3 · 0⤊ 0⤋
Two rebuilt axles $85 each Cash and carry from axle shop in the Yellow pages. Then replace both 3 to 4 hours at the shops labor rate. If uncle George and Fred has a 36mm socket and 2 -1/4 inch socket and 17mm socket and 19mm socket enlist his lazy ***! To help you. Have Uncle George and Fred put the axles in!
I can say from personal experence the Altima Has two different types of axles depending on the type of differential is inside your transmission Viscus or open differential once that is determined carry on with the axle change
2006-08-31 20:03:04 · answer #2 · answered by John Paul 7 · 0⤊ 0⤋