more likely to be bad wiring
2006-08-30 15:18:34
·
answer #1
·
answered by AO 2
·
0⤊
0⤋
Do you have the model number of the Kenwood stereo? Try pressing the reset button. If this does not work, it will need to be serviced. You can find a service center here:
http://www.kenwoodusa.com/DealerLocator/Default.aspx
I doubt the problem is with the speakers wires. If it is, the problem is with all four speakers, which is not that likely.
2006-09-01 10:16:12
·
answer #2
·
answered by nsputnik 2
·
0⤊
0⤋
I answered this same question in the past, this was my reply:
its gotta be one of 2 problems: one of the 4 speakers connected to ur stereois shorting out, grouding out or the wire to it is grouding out. that causes the little amplifier on the back of the radio to shut off eventhough the lights are on and everything, but no sound. Problem #2 is that the amplifier on the back of ur stereo is already dead, bad, burnt because of problem # 1 !!!
"just an opinion"
2006-08-30 15:19:54
·
answer #3
·
answered by Slacker34 3
·
0⤊
0⤋
Be sure to check all wiring and connections..I had a similar problem and ahd a short in the wiring..I just replaced the wiring system..Hope this helps
2006-08-30 15:22:07
·
answer #4
·
answered by Michelle T 1
·
0⤊
0⤋
If it was working, and stopped, and you get nothing from any of the speakers, I would bet wiring and something is shorted.
2006-08-30 15:27:32
·
answer #5
·
answered by oklatom 7
·
0⤊
0⤋
maximum obtainable element is that that's a plague because of the fact that your community is unsecured. some hacker might placed it on your computing device attempting to scare you. tell your father and mom. get an anti-virus and consider with it the entire gadget. next examine the speaker twine. It additionally might properly be that your computing device picked up a radio sign. If none of those element artwork bypass some computing device shop and tell them your subject. in the event that they think of that's needed enable them to take your computing device and consider each little thing. Ask them in the event that they might enable it on standby so as that they might see if it occurs to them too. they're experts so as that they might desire to appreciate what's incorrect.i in my opinion wish I helped. That became actually creepy.
2016-11-06 02:59:03
·
answer #6
·
answered by hartzell 4
·
0⤊
0⤋
short in the speakers somewhere in the wiring
2006-08-31 05:03:36
·
answer #7
·
answered by marcosm_65 3
·
0⤊
0⤋
I believe bad wiring.
2006-08-30 15:21:35
·
answer #8
·
answered by nbr660 6
·
0⤊
0⤋
bad wiring is my guess check for connections and make sure your - and + are right
2006-08-30 15:20:16
·
answer #9
·
answered by Anonymous
·
0⤊
0⤋