2006-08-29 04:27:29 · 3 answers · asked by well o 1 in Cars & Transportation ➔ Car Audio
Depending on the year of the Caravan, you will first need to remove the trim plate in front of the radio. On the older ones they are held in with screws, the newer ones just snap in place with clips.
There will be 2-4 bolts holding the radio in (depending on they year) remove them and gently pull the radio out. The wiring harness is connected with a clip, gently pry the latch and pull the connector(s) free of the radio. There will be a ground strap or wire that may be held on with a bolt or just a clip. Disconnect that or remove the bolt!
Pull the antenna cable out. The radio is now removed!!
If you are putting in another factory radio, reversed the procedure to install the new one. If you are putting in an aftermarket system, get the correct adapter kit, so that it will mount and plug into the wiring harness without cutting the harness!
2006-08-29 04:40:33 · answer #1 · answered by fire4511 7 · 1⤊ 0⤋
leave it in my neighborhood for the night, in the mornin i ganruntee the job is done
2006-08-29 17:45:11 · answer #2 · answered by baseball_saenz 2 · 0⤊ 0⤋
with a ball bat
2006-08-29 11:31:09 · answer #3 · answered by chopperdoc100mph 2 · 0⤊ 0⤋