how do you get a little mold out of a water bottle?

Question

i have about a dozen little black spots on the bottom of my nalgene water bottle. can i get them out or should i just buy a new bottle?

Answer 1

Probably should just buy a new bottle but if you are particularly attached to this one use some bleach and a bottle brush to scrub the mold away and then rinse it out VERY THOROUGHLY with hot water and let it air dry for a day or so before you use it.

Answer 2

a bleach water solution should do the trick, and go to the store and buy a baby bottle brush so you can clean it out properly from now on. When you're not using it, rinse it out and let that puppy air dry. that should help. Or put it in the freezer (I don't know what "nalgene" is, but if it's expensive, you may not want to do this because it may crack it.)

Answer 3

Buy a new bottle!Do you WANT to drink mold?And even if you get the black spots out,there could be tiny bacteria with diseases.Really just buy a new bottle

Answer 4

Fill it about half with water, add a little dish detergent, and a teaspoon of bleach & shake it vigourously & leave it over night. If there is still odor in the bottle put some lemon juice in it overnight.

Answer 5

If you're obsess with getting the mold out,then use Tilex.
If you are concern about your health then just get a new bottle

Answer 6

end utilising the lavatory paper, it would not artwork. Use some raw rice and vinegar or bleach, and water. shake it up and enable it soak slightly. If that would not artwork then you truthfully favor to purchase a sparkling one. I stay 10 minutes from the coastline and characteristic no problems with algae.

Answer 7

Buy a new bottle.

Answer 8

Vinegar. (works good on bathroom gunk, too....like the stuff that gets on the showerhead and in between the faucet and the tile)

Answer 9

buy a new bottle

Answer 10

you can use diluted bleach, just make sure you rinse it well after wards. If this doesn't work, throw it away and get a new one.