Yes, you just rinse the acrylic out of the brush with water while it's still wet.
If it's dried, then the fun starts... I use a oil brush cleaner made by E-Z - soak it, then work out the dried material. This works on acrylics AND oils. Great stuff, and fairly non-toxic. (also cleans airbushes that are gunked up with dried paint).
The difference between acrylic and oils...paints are made up of a powdered pigment (generally speaking) and a binder. The binder in oils...is well, usually an oil based product (such as linseed). The binder in acrylic is a water based polymer?
2006-08-28 01:39:09
·
answer #1
·
answered by colourshift 4
·
0⤊
0⤋
Acrylic paint is cleaned with soap and water.
Acrylic dries a lot faster than oil. But you can use retarders or extenders to make oil or acrylics dry faster or longer.
Oil paint is more fluid than acrylic, acrylic feels more guey.
The oil and solvents used in oil paints are poisonous to human and the environment so care should be take when using and disposing of the products. Acrylics are a lot safer and don't give out vapors when drying like oils do.
good luck
2006-08-27 18:10:26
·
answer #2
·
answered by Anonymous
·
0⤊
0⤋
If you're using oil paint, apply turpentine (or a similar solvent) to remove the worst of the paint residue.
If you're using acrylics, you'll use just soap-and-water for cleaning.
After you've removed most of the paint, it's time to take out a brush soap, use a round cake of brush soap, sold at most art supply stores, and apply it with warm, not hot water.
If your brushes are intended for use with acrylics, you can dry the brushes horizontally, or stand them, bristles up, in an open container to air dry.
2006-08-27 02:58:01
·
answer #3
·
answered by Lindy357 3
·
0⤊
0⤋
Acrylic paints are water based. Rinse them with hot water. The brushes might retain a little of the color of the paint that was previously used but will not alter the color that you use next.
2006-08-27 03:30:52
·
answer #4
·
answered by youngliver2000 3
·
0⤊
0⤋
Yeah, water cleans acrylic from brushes when the paint is wet. Don't let it dry..or it's curtains for the brush.
Acrylics are like waterbased-fast-drying plastics. Impasto (thick-thick) applications are more sensible with these.
Oils dry slow and can be reworked and reworked. Achieving color blended results on the canvas work well here too. We now use a OMS to clean brushes and thin the paint. Odorless mineral Spirits, because they're safer for humans.
2006-08-27 03:47:38
·
answer #5
·
answered by Zezo 2
·
1⤊
0⤋
I'm not to sure, i think acrylic is water base and water would do it. Just rinse it , if resistant, soak it for couple of Hours.
In that case, surface or other thing can be rinse with water if acrylic, thinner if oil base.
Hope i helped, if I'm wrong forgive me!
2006-08-27 02:47:36
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋
Acrylic paint is water based.
Just soaking it in water will do. If you need a quick rinse, Use warm water. Do not use hot water as it will damage the bristles.
2006-08-28 04:22:42
·
answer #7
·
answered by isz_rossi 3
·
0⤊
0⤋
If the acrylics are still wet on the brush just wash them with warm soapy water.
If they have dried on the brush, don't despair. Just soak them in rubbing alcohol for a few minutes and it will dissolve the paint and make your brushes almost like new.
2006-08-27 13:38:48
·
answer #8
·
answered by Mandalawind 5
·
0⤊
0⤋
i went to an art school for a bit and all we used to clean acylic paint off of the brushes was soap and water...let me rephrase that...we were TOLD by the PROFESSIONAL art instructors to wash the brushes with acrylic paint on them with soap and water...thats all ive got.
2006-08-27 02:44:20
·
answer #9
·
answered by schnoozer 2
·
0⤊
0⤋
Paint thinner. Oil is nearly impossible,
2006-08-27 02:43:36
·
answer #10
·
answered by Anonymous
·
0⤊
1⤋