I need to connect speaker and TV cable between two rooms and have to use on-wall means. Apart from using cable/wire hooks or corrugated split cable-cover sleeves, is there anything else I could use to keep everything neat and as "invisible" as possible?
2006-08-20 09:39:24 · 3 answers · asked by edhan90 1 in Consumer Electronics ➔ Other - Electronics
check out panduit corp.
2006-08-23 11:28:32 · answer #1 · answered by Paul J 2 · 0⤊ 0⤋
use the corners and trim for "hiding" the stuff. It will require more wire than a straight line, but it always looks better.
For a "keeper" use short pieces of straws that have been split down the lenghth, clear is almost "invisible".
Staple the straw to the wall and put the wiring between the split.
2006-08-20 16:48:58 · answer #2 · answered by wi_saint 6 · 0⤊ 0⤋
If you have carpet you can carefully pull up the edge in short sections and tuck it underneath.
If you have baseboard you can pull it, cut a notch along the bottom edge of the wall to recess the wire in, then replace the baseboard. This take a little more skill and hope you don't ruin any of the baseboard when removing.
2006-08-20 18:24:26 · answer #3 · answered by hogie0101 4 · 0⤊ 0⤋