English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

i am using a kodak z650

2006-08-20 08:51:20 · 7 answers · asked by Anonymous in Consumer Electronics Cameras

7 answers

This is not caused by a camera brand thing. It is normal. Bright light results in a faster shutter speed, since there is enough light. However if you are photographing something inbetween the light source and your camera, then that object or person will be very dark. The possible solutions are:

1. use a Flash, since it is the object you want to have nicely lit
2. change your position
3. change shutterspeed

2006-08-20 09:01:08 · answer #1 · answered by Ric 1 · 0 0

To take a photo you have two factors... the opening of the lenses and the time it is exposed. Digital or analogue, it makes no difference.... If you're 'target' is in the shadow or against a stronger light source you must use a flash or some other way to illuminate it more than the surrounding area, otherwise you'll get a dark picture

2006-08-20 15:58:57 · answer #2 · answered by virgilio costa 3 · 0 0

it is the problem of exposure compensation applied when the light measuring system detects that there is too much bright light and therefore it decides to bring the overall brightness down, resulting in rather dark picture even though it is supposed to be brighter. you could either try to take the picture with ur back against the sun or position yourself in such a way that the sun is anywhere between your back and your side. or if your camera has the exposure compensation option, bring the exposure value to somewhere between EV+1 to +2. this should make your picture brighter.

2006-08-20 22:35:56 · answer #3 · answered by portivee 3 · 0 0

it all happens with exposure and brightness auto adjust

in a digital camera, if auto brightness is on it will try to darken the entire picture inorder to get the highest quality photographof the fore ground or whatever you havethe crosshairs pointed on

on an old school film camera the photo gets washed out with over exposure to bright light (i.e. the sun)

you can avoid this by taking a picture with the sun at your back

2006-08-20 16:05:18 · answer #4 · answered by Anonymous · 0 0

The light kinda "cloges" up the lens and less light neded goes through

2006-08-20 15:56:49 · answer #5 · answered by Anonymous · 0 0

Make sure the sun is behind the camera, not behind the subject.

2006-08-20 16:04:21 · answer #6 · answered by Anonymous · 0 0

too much light or shadows

2006-08-20 16:29:09 · answer #7 · answered by Shelby P 1 · 0 0

fedest.com, questions and answers