For CIS it is as follows, control pressure, warm 49 to 57 psi, system pressure 65 to 75 psi, residual pressure after ten minutes 37.7 after 20 minutes 34.8, for carbureted engine it is 2.9 to 3.6 psi. CIS is pretty straight forward to work on, listen to see if the pump is running, if not check the relay or fuse, then simply remove the cover from the air meter, use a magnet to lift it or your fingers, keep it raised, remove an injector from the back of the engine, rotate the engine a couple of rounds to see if your getting any fuel, if not check for clogged filter or none working pump. Hope this helps.
2006-08-19 18:13:54
·
answer #1
·
answered by bahn 2
·
0⤊
0⤋