Go to Fantastic Sam's.
You can burn out your hair and cause other problems--like blinding yourself--if you attempt this at home with no experience.
2006-08-27 11:06:14
·
answer #1
·
answered by nora22000 7
·
0⤊
0⤋
you have some great options. Not all will be cheap they can range any where from $20 - $200 more or less. You can go to a beauty shop or a salon and buy one there if they sell it . those are very good ones but not to often there cheap. If you have a hair care shop at your local mall then those might be good and probuley you'll have more options and different price ranges. Claire's has like 5 or 6 and are about 48$. I suggest you buy an at home staightner because getting your staightenend at a salon will cost a ton of money if you get it done every so often. And also i would try to get it sone at the salons place 1st that way you can see if you like yourself with strait hair and if you don't u would'nt have spent that much oney on a straigtner you've only
used once and can't return! but compare prices and hope i helped a ton!
2006-08-19 12:25:54
·
answer #2
·
answered by sparklestar 2
·
0⤊
0⤋
Are you looking for the hair straightener chemicals or the tool. Well, the chemicals you can find almost anywhere. Try looking in you local hair salon product store like Sally's. You can buy the hair straightening tool there as well. If your going to buy a high quality tool, make sure its made of ceramic and not ceramic coated.
2006-08-19 11:50:00
·
answer #3
·
answered by Sydney 4
·
1⤊
0⤋
It's better to use a ceramic straightener, it will reduce the damage to your hair. You can always purchase a decent price straightener at Brandsmart USA, the average price ranges $30 -$100. Good Luck!
2006-08-27 11:08:07
·
answer #4
·
answered by Anonymous
·
0⤊
0⤋
You can get the Dark and Lovely at Family Dollar or Dollar General, I think they cost around $5 to $8, may be a little more depending on the area.
2006-08-23 18:24:55
·
answer #5
·
answered by Anonymous
·
0⤊
0⤋
in case you advise the straightening irons, certain, they do damage hair. The implement itself isn't the region, even with the undeniable fact that the those that use them. maximum do not understand a thanks to apply them wisely, and overheat their hair, or do it even as the hair isn't thoroughly dry. Moisture contained in the hair even as heated will create steam and "explode" the hair on the interior and then in some months, when you've forgotten what you've executed, will the hair come aside and also you do not understand why. countless the nice and cozy temperature danger-free practices products would artwork slightly, yet perfect use of the irons is what you want to do. bear in mind that once the wear and tear is executed, you could not restore it. each little thing works. yet you want to apply the right device contained in the right thanks to get the outcomes you want. utilising the incorrect device contained in the incorrect way on the incorrect hair will continuously create a mess.
2016-11-30 20:22:31
·
answer #6
·
answered by manders 3
·
0⤊
0⤋
Yes , you can go to walmart a purchase a hair straightening kit , it's basically the same as a perm but you don't use curlers.
2006-08-26 07:45:11
·
answer #7
·
answered by ? 5
·
0⤊
0⤋
the best place to get a good strightner from is sally's beauty supply, make sure that it is ceramic.. and the reason why i say that store is because they will give you the right size for the thickness of your hair and i bought one from there 3 years ago and i still have them and they still get as hot as they did the first day i bought them and they don't cost alot.... Good luck
2006-08-27 11:12:58
·
answer #8
·
answered by poohda27 1
·
0⤊
0⤋
GHD straighteners - they are fantastic. If you want perfect silky straight hair you must get GHD. Check out the website for prices:
2006-08-26 11:05:49
·
answer #9
·
answered by Curious 3
·
0⤊
0⤋
U can get them almost anywhere. Try Target or kmart. The best ones arent always the dearest either. Try getting ones with a ceramic plate i think they work best but thats just me. They also range in price try gettign one mid range
2006-08-19 13:05:36
·
answer #10
·
answered by question 2
·
0⤊
0⤋