English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I don't want to have to put two or three 9-volt batteries together just to get the right power. Do I use a transformer for this? If so how do I do it and what kind? Thanks

2006-08-18 13:54:29 · 9 answers · asked by David H 1 in Science & Mathematics Engineering

9 answers

first you have to change it to ac.then use a transformer.i suggest you dont do it .just go and bye a simple transfromer and use the line .batteries are no good in this case

2006-08-19 04:06:08 · answer #1 · answered by nima_iran_1985 3 · 0 0

A transformer won't work. They only work with AC. Batteries are DC. If you are talking about a 9 volt transistor battery it will not power a motor any larger than a thimble anyhow. If you have a 9volt battery that weighs a couple of pounds it will run the DC motor at a reduced speed. Your best bet is get two motorcycle or automotive batteries and connect them in series (24 volts). This of course depends on the size of the motor.
A small battery will not run most motors. You couldn't start your car with eight flashlight batteries (12volts) for the same reason. Motors require many amps and although small batteries may have enough voltage they cannot deliver the required current.

2006-08-18 21:12:03 · answer #2 · answered by Buffertest 3 · 2 1

A transformer will not work with a battery as it is DC (Direct Current). Transformers only work with AC (Alternating Current).

You can get a converter but believe me, by the time you pay for the inverter and the measley power you would get out of a 9 volt battery, it just ain't worth it.

Find a 24 volt power supply of sufficient amperage to do the job.

2006-08-18 21:02:43 · answer #3 · answered by Albannach 6 · 4 0

It would be cost effective if you add batteries to get the right voltage. you cannot use transformer in DC voltage

2006-08-19 03:15:38 · answer #4 · answered by winhearts 2 · 0 0

Use the Switch to increase the Voltage.

2006-08-18 21:37:32 · answer #5 · answered by vaibhav_gupte 1 · 0 0

Try something like Maxim's Step up voltage converters. See

http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3138

2006-08-19 01:22:44 · answer #6 · answered by rscanner 6 · 1 1

this seems like a Rube Goldberg type of question. Maybe you theoretically could, but it's very a impractical solution.

2006-08-20 16:11:58 · answer #7 · answered by ronw 4 · 0 0

use a step up transformer

2006-08-18 21:01:08 · answer #8 · answered by Gary 1 · 0 5

use a transformer for this

2006-08-18 20:59:39 · answer #9 · answered by Anonymous · 0 5

fedest.com, questions and answers