tv's how to conect with other appliances?

Question

Iv'e got a TV,with 2 scart sockets,a video recorder with 1 scart docket, aDVD player with 1 scart socket finally a digi boxagain with 1 scart socket can anyone tell me how to conect them all and in which order please

Answer 1

ok ty engineer here, dvd to scart 2.
if your vcr is mono just use rf lead to connect put onto channel o if you can as this is normaly synchronised for vcr
if your vcr is stereo do it this way,
sky to scart 1 , sky vcr output to your vcr in scart,
when you play on your vcr it will boot through your sky box
it doesnt effect it while viewing sky or tapeing sky only on vcr playback (if your playing vcr i guess your watching it) view sky on scart 1,

Answer 2

If you only have one scart socket on your other appliances then you'll need a scart junction box as you have no way of any of them acting as a pass through unit.

Answer 3

sounds like you you should get a scart expander I can connect it all up and have done on several systems but it is easier to do than to explain if u know what I mean

Answer 4

turn the lead round placed the end that's in the television into the computer and verify out looking a socket for the RGB plugs. My wager is the very are area of the Scart association yet without the sq. connector. you may want to be able to get he lead your reported do not recognize the position try some cable shops or pc hardware shops i recognize that does no longer help you immediately. good luck

Answer 5

always connect dvd to av1/line1... then digibox to tv on av2... forget scart for the video.. just use RF leads....to connect them...
put the digibox on.. and video to ch6.. then tune video to digibox picture so you can record it.....

Answer 6

go to mastercare .co .uk and they offer a free diagram which shows you how to interconnect all of these appliances properly