English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

6 answers

Measure length/width times height on all walls, do not subtract doorways or windows, and look on the paint can label.

I'm looking at a gallon can NOW that states 275 to 350 sq. ft. coverage, depending on the subsurface to be painted, I'll let you decide that.

In a 10 x 12 room for example, with 8 ft ceilings you'll have
352 sq. ft. of wall space. The reason I said don't subtract openings is to allow extra paint.

After applying thousands of gallons, I find that in a room that size, I can get one coat on with a gallon, sometimes a bit more than a single coat.

It's simple math, and knowing the suggested coverage, depending on the current finish on the walls.

Rev. Steven

Celings will be a gallon or less, and do the math again, if the ceilings are 10 ft.

2006-08-18 00:21:27 · answer #1 · answered by DIY Doc 7 · 0 1

First you need to measure the "paintable" areas. If you're using a regular latex type of paint, a gallon will cover approximately 400 square feet. Also take into consideration if you will need to do a second coat. Square footage is calculated by measuring the height and width of the paintable, multiply those 2 numbers and that is the square footage. Example: Wall is 10 feet wide and 8 feet in height,,,,,,,,,,this equals 80 sq. ft.

Good luck.

2006-08-17 21:29:08 · answer #2 · answered by steve 1 · 0 1

http://www.benjaminmoore.ca/howto/paint_calculator.aspx ...ths will ACTUALLY help you.

So many folks will try to help you , just go here and avoid the hassle of reading all these answers that are all different! Ps- always use Sherwin-WIlliams or Benjamin Moore paints! They will cover better, last longer, and have superb reputations.......

ps-I wish I could help you personally, it's what I do....

2006-08-18 00:27:55 · answer #3 · answered by Ricknows 5 · 0 0

figure out the surface area that needs to be painted and then go to the paint clerk at your local hardware store and they will tell you.

2006-08-17 21:08:53 · answer #4 · answered by Jill W 4 · 0 1

paint the ceiling first that area approximates down and side portion of your room.

2006-08-17 21:51:27 · answer #5 · answered by desiree gersaniba 3 · 0 1

measure room with x height to get square footage you will need approx 1 gallon per 350 square feet

2006-08-17 21:12:10 · answer #6 · answered by BRUCE H 2 · 0 1

fedest.com, questions and answers