2006-08-16 10:47:23 · 7 answers · asked by flash 1 in Consumer Electronics ➔ TVs
If you don't get the exact answer you're looking for or if not fast enough, give an internet search a try. You might be surprised at what you might be able to find for yourself...
2006-08-16 12:14:23 · answer #1 · answered by Anonymous · 3⤊ 0⤋
yes, this is how cable tv systems are built at their main distribution headends ( just with larger splitters, called combiners, but the same for all but the technical field guys) . common practice to combine ( hence the term combiner) 2 separate, frequency offset signals ( off air ch 2 and off air ch 7 as an example) from separate sources onto a single wire for further use. the signal loss printed on the splitter ( 3.5 dbmv is common) does apply when reversed (2 signals at 10 dbmv will be combined at the output at 6.5 dbmv). once the 2 sources are combined, can be split like regular cable tv signal, and loss values of splitter applies again.can't be done with 2 raw video sources ( dvd video outputs, video camera/vcroutputs) or with a video output and a cable/off air antenna channel ( combining apples and oranges w/o getting technical). hope it helps!
2006-08-17 14:12:42 · answer #2 · answered by bill0341 2 · 0⤊ 0⤋
Splitters are really splitter/combiners and work as either. Why are you trying to combine signals? If you have an antenna and want to add the signal to the cable, you may run into difficulties with the signals interfering with each other.
2006-08-16 19:40:01 · answer #3 · answered by gp4rts 7 · 0⤊ 0⤋
One input to split two outputs.
2006-08-16 11:08:46 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Yes
2006-08-16 10:53:00 · answer #5 · answered by Duke 1 · 0⤊ 0⤋
yepp- the same with a phone line splitter too
2006-08-16 10:57:17 · answer #6 · answered by Brett 3 · 0⤊ 0⤋
yeppers (I AM GOOD!)
2006-08-16 11:27:47 · answer #7 · answered by Anonymous · 0⤊ 0⤋