how do you change a light bulb?

Answer 1

turn the old one counter clockwise, skrew the new one clockwise. good luck

Answer 2

It depends on the light bulb. With the most common light bulbs unscrewing in the counter clockwise direction (righty-tighty lefty-loosy) will allow you to remove it.

Once you get the bulb out, examine it for markings indicating what kind of light bulb it is. Replace it with the same type. If there is a warning sticker on the fixture telling you what kind of bulb to use, go by that sticker instead. You don't want it to start a fire!

Often the most difficult part is getting access to the light bulb. You might need a later. You might need a screwdriver to get the cover off if it has one.

For safety:

* Turn of power to the fixture before changing the bulb. If it's a lamp, unplug it from the wall first. If it's wall mounted, turn off the light-switch.

* If you have to use a latter to reach it, make sure you read and head the warning labels on the later. Have someone hold the latter while you clime it.

* If the light bulb is broken or may become broken use thick leather gloves when handling it.

* If your lamp, wall socket, or fixture has any warning labels, read them and follow their instructions. Failure to do so may result in fire!

Failure to follow safety precautions could lead to property damage, serious bodily injury, or death. However, many millions of light bulbs are replaced each year without problems.

Answer 3

I suggest a group intervention to get things going, but the light bulb really has to want to change.

Answer 4

You twist a bulb to the left,
You twist a bulb to the right;
Pull a chain or flip the switch
And you should see the light.

Answer 5

buy the light bulb. turn off the lights. unscrew the old light bulb. gently put it down somewhere. screw on the new light bulb. and remember to turn right.. and then turn on the lights and see if it works. and then throw away the old light bulb. the end

Answer 6

Unknown, I don't know if you can physically change a light bulb. However, I do know how to replace a light bulb.

Answer 7

First you get four clowns: one only speaks French, one only speaks Spanish, one only speaks Italian, and one only speaks English...

Seriously, you just cut the power supply to the fixture, screw out the bad bulb, and replace it with a new one. Check to make sure the wattage of the new one does not exceed the rating of the fixture before using it. And remember, as with everything else, when screwing in and out (ignore the perverts who will comment on this, please), it's "lefty loosey, righty tighty" which means twist to the left to remove, and to the right to replace.***(See endnote before continuing.)

Are you talking about stage lights? I wondered, since it's in the performing arts section. Same thing applies. Move your gels to the side or remove them--what you have to do will depend on the age of your fixture. Replace the bulb. Replace your gels. You will have to light them up to make sure you didn't accidentally move them, and that they are still focused on the right part of the stage.

If your lights are up high, such as catwalk lights, it's sometimes easiest to replace all the lights at one time. It takes more time, and money, as set lights are sometimes expensive, but changing them all at one time, especially before a performance, keeps them from going out at critical times.

A follow spot, whether mechanical or manual, works the same way. There is usually a trap on the housing that opens, and you just change the bulb.

***If you aren't talking about stage lights, ignore everything from this point forward.

Answer 8

you begin by researching online best practices for this dangerous and highly skilled task. it is good to consult at least three sources, seeing as how there are various customs around the world dictating how this should be done. the type of light bulb you use further increases the need for accuracy and diligence in your quest to renew the light-producing mechanism in your light fixture. it is always wise, of course, to employ the 'buddy system' in case of catastrophe. this will reduce your risk of personal injury and mental insanity, as the rigors of lightbulb-changing are taxing to even the hardiest of souls. i am glad you asked this question, o seeker, for you will find much enlightenment (pun not intended) as you continue to uncover the hidden secrets of the wonderful world of lighbulb-changing. enjoy, and may the home furnishing gods bless you!

Answer 9

unscrew the light bulb, throw the old one away and screw the new light bulb on

Answer 10

take the cover off the light/lamp, unscrew the light counter clockwise and then replace the bulb.

Answer 11

Hold the bulb, and have someone turn the room clockwise.