everything works but i start sewing and a few stitches int it by thread breaks inside the machine
2006-08-14 15:28:41 · 3 answers · asked by trishnidansan 2 in Games & Recreation ➔ Hobbies & Crafts
Several things can cause this.
Excess lint in bobbin case.
Needle in the wrong way.
Thread itself not right size or too old.
Thread tangled in bobbin case.
Bobbin latch loose.
Chipped needle tip. (Use magnifier to check this).
Needle not tightened in slot.
Also, as the others say, tension set too tight.
Good luck.
2006-08-14 19:10:13 · answer #1 · answered by Eyes 5 · 0⤊ 0⤋
Three things I know of to cause the thread to break, the tread quality and the tension were mentioned by Nanny . . . The third is the needle . . . make sure you are using the right kind of needle for your fabrics, if you are not, it could be causing the thread to fray and break.
2006-08-14 22:44:06 · answer #2 · answered by WolfieChick 3 · 0⤊ 0⤋
You need to use a strong, brandname thread. Check your local fabric store. Also, your tension could be too tight. Check your manual.
2006-08-14 22:33:27 · answer #3 · answered by Lydia 7 · 0⤊ 0⤋