Don't want to by-pass heater core. Please help.
2006-08-11 13:54:47 · 5 answers · asked by Sherrtx 1 in Cars & Transportation ➔ Car Makes ➔ Jeep
Sounds like air blend door cable if manual or servo motor auto air is not allowing the heat cool air door not to move to closed no heat posistion. The only way you will know which is to have someone operate the regristers def. face, floor ect. that is not the one and move on to blue to red slider or blue to red twist knob and watch each side of the heater case for movement of levers servos and cables. Electric Servos you can feel them working. Something could have fallen down the defroster vent by the windshield and is holding a door open.
2006-08-11 14:04:20 · answer #1 · answered by John Paul 7 · 1⤊ 0⤋
You have your connections wrong. You have a vacuum controlled switching valve that goes to A/C and to heater.
When you select your A/C, it is supposed to bypass the heater and run cold air. You have the connections hooked up wrong and when you select A/C, you are activating the heater.
Follow your connections, and reconnect. When you replaced your heater core, this is when you got the connections crossed.
Easy One,
Darryl S.
2006-08-11 14:04:57 · answer #2 · answered by Anonymous · 1⤊ 0⤋
probable. the united kingdom is in Europe, so flights might require you to have the means to speak interior the language of the country you are going to, extremely because you'll be in that us of a to fly back to the united kingdom. properly, i don't comprehend the specifics yet you will no longer purely have English speaking passengers. Going back and forth from France and the country, each and all of the air hostesses have been able to speak English and French from what i might desire to confirm/pay attention extremely while they make bulletins. They mentioned the comparable element in the two languages. In Paris, very virtually each and every person who worked at Charles de Gaulle substitute into able to speak English as properly, despite the fact that if it wasn't their community language which i might desire to tell.
2016-11-04 09:59:16 · answer #3 · answered by overbay 4 · 0⤊ 0⤋
You got to make sure a vaccume hore on your heater vent switch has not gone bad. Could it be your switch is just not working.
2006-08-11 14:02:21 · answer #4 · answered by brooklyn 4 · 0⤊ 0⤋
I've got a 93 GC, sounds like your condensor has crapped out.
http://www.partstrain.com/
Check it out.
Hope this works for you. JEEPS RULE
2006-08-11 14:02:02 · answer #5 · answered by armytao2k3 2 · 0⤊ 0⤋