related to airforce??
2006-08-11 05:52:23 · 13 answers · asked by Anonymous in Cars & Transportation ➔ Aircraft
"Roger" = I have received and understand your message.
"Wilco" = I have received, understand your message and will comply.
So as you can see, there is no need to use both "roger" and "wilco" in the same reply.
You will never hear the phrase "over and out" used in aviation related terminology.
Also taken from the FAAO 7110.65 Air Traffic Control, Pilot/Controller Glossary
"ROGER- I have received all of your last transmission. It should not be used to answer a question requiring a yes or a no answer."
"WILCO- I have received your message, understand it, and will comply with it."
2006-08-11 06:03:39 · answer #1 · answered by Lew W 4 · 2⤊ 2⤋
Over N Out
2016-11-01 06:37:58 · answer #2 · answered by Anonymous · 0⤊ 0⤋
When someone says Over and Out, they are finishing the conversation. The other person acknowledges the receipt the Over and Out, by saying Roger.
2006-08-11 08:46:10 · answer #3 · answered by B-Loco 3 · 0⤊ 2⤋
The term "over and out" is not used in aviation phsaeology at ant time. Never as. Its roots lay in its useage on the big screen, made up by scrip writers in Hollywood.
2006-08-11 14:56:04 · answer #4 · answered by Anonymous · 0⤊ 0⤋
"Roger" means: "I have received your message, and if it is an instruction, will comply with it." "Over and out" is nonsense -- no knowledgeable person says that, because "Over" means that the speaker has finished speaking and awaits a reply, while "Out" means that the speaker has finished speaking and does not expect a reply.
2006-08-11 20:34:45 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Roger simply means understood. it works as a responce letting the person on the other end of the communicator know that u understood them.
2006-08-11 06:04:27 · answer #6 · answered by alex g 2 · 0⤊ 2⤋
technically...over n out should never be used together...over is turning the conversation over to the other person...out means the conversation is over...out should only be used by the person who initiated the conversation..."roger" means that you understand the last transmission...
2006-08-11 06:36:14 · answer #7 · answered by elchavoguapo 6 · 0⤊ 1⤋
Lew W has it right . The pilot /controller glossary is the authoritative
source
2006-08-12 17:02:46 · answer #8 · answered by cherokeeflyer 6 · 0⤊ 0⤋
Check out this web page.
2006-08-11 14:41:47 · answer #9 · answered by planedws 3 · 0⤊ 0⤋
"Over and Out" requires no answer. It means the speaker has ended communications by turning off his radio or changing frequencies.
Also extremely dated terminology, normally only heard on old WWII movies.
2006-08-11 07:21:55 · answer #10 · answered by JetDoc 7 · 0⤊ 3⤋