Just purchased a 1999 Ford Expedition and the lock on the drivers side door does not go all the way up when the keyless entry is used. It's sounds kinda "weak" compared to the other three doors, when trying to open. Anyone seen this problem on a Ford and/or know how to fix it.
2006-08-10 12:53:24 · 6 answers · asked by eltel2910 1 in Cars & Transportation ➔ Car Makes ➔ Ford
It has a small solenoid in the door that needs replaced .
2006-08-10 13:00:47 · answer #1 · answered by les 3 · 0⤊ 0⤋
UH Ray--Lene
AHH DO BuHleave da man asked about an EXPEDITION not an EXCURSION.. Ok it starts with E and ends with N. That's close but no cigar or the (EX)PEDITIO(N) Are you blonde...
I'll take the points
Now That I've Burned Raylene, It may be something hanging the action of the lock, a dirty solenoid or jst a weak one that needs replacing....
2006-08-12 11:36:46 · answer #2 · answered by Uncle Red 6 · 0⤊ 0⤋
If it wasn't a trick question, the answer would be to replace the FORD EXCURSION POWER DOOR LOCK ACTUATOR LH.
Ford didn't debut the Excursion until 2000.
2006-08-10 17:07:32 · answer #3 · answered by Raylene 3 · 0⤊ 0⤋
If the actuator applications, the subject is probable the cheap-@ss yellow plastic bushings and clips Ford makes use of on the pivot mechanisms. There a soreness to get to, yet extremely replaced.
2016-11-04 07:56:09 · answer #4 · answered by ? 4 · 0⤊ 0⤋
The actuator or power lock motor is worn out
2006-08-10 13:46:15 · answer #5 · answered by kayef57 5 · 0⤊ 0⤋
check door lock solenoid may need new one
2006-08-12 05:04:57 · answer #6 · answered by Ronnie-five 2 · 0⤊ 0⤋