How do you program a 2002 Nissan Frontier remote key?

Answer 1

insert the key 6 times in 10 secs. push the button manually lock and unlock the drivers door then push the button on any additional remotes repeat for up to 4 remotes

Answer 2

I'm a Nissan Master tech.
The real deal... get into the truck use the lock switch on the door lock the truck. Push the key into the ignition lock and out of the lock 6 times in ten seconds. The turnsignal indicators will flash twice turn the ingnition to acc. the posistion where the warning lights light up around the speedometer turn on, Then push any button on the remote and turnsignal indicators will flash twice Second remote unlock and relock the door with the switch push any button on the second remote you can have as many as five remotes. But you have to program all the remotes you want to use at the same time...

Answer 3

Nissan Frontier Keyless Entry

Answer 4

I could shrink and paste this the following we bypass back. #a million. get into the vehicle "roll down the window only for air". #2. lock the door with the skill lock swap. #3. insert and withdraw the major thoroughly six situations in ten seconds. lots of time do no longer rush. #4. look ahead to the trun-signal arrows to flash two times. #5. positioned key back in and turn lock to on posistion, merely in the previous crank. #5 push any button on the first distant keyless fob turnsignals will flash two times. #6. any added fobs? launch and relock the door and push any button on the 2d distant turnsignals will flash two times. as a lot as 5 remotes will be programed launch and lock between each, yet anytime you do above you should have all the remotes as this cancels all besides the undeniable fact that the reprogramed keyless get acceptable of entry to fobs.

Answer 5

its is so easy just insert the key three time in the ignition and then press the remote button soon it will program the remote