2006-08-06 12:30:58 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Chevrolet
According to Alldata this is the info you need.
Ignition Timing
2.8L 10 BTDC
Idle speed 800 RPM's.
2006-08-06 12:45:06 · answer #1 · answered by grandnational_man 3 · 0⤊ 0⤋
The 2.8 V6 is a lame engine. The 3.1 is the same engine only with more displacement and it is way better, but be forewarned that a lot of that is because it is fuel injected. A small block chevy engine will do more than perk it up. It will make it a screamer, but it is not a bolt in operation. How handy are you?
2016-03-16 23:41:34 · answer #2 · answered by Yesennia 4 · 0⤊ 0⤋
According to my book 10 deg BTDC @ 800 to 850 RPM for auto, 1000 RPM for a stick shift.
2006-08-06 14:18:54 · answer #3 · answered by mgrenia 3 · 0⤊ 0⤋
timing is about 8 to 10 degrease BTC (before top dead center) or advanced at about 850 rpms if automatic,
if manual then 1000 rpms
2006-08-06 12:46:38 · answer #4 · answered by Not Y 1 · 0⤊ 0⤋
you will need to put est in bypass mode to set it . sets on 8 or 10degrees unplug est conn!
2006-08-10 11:27:44 · answer #5 · answered by deltech 4 · 1⤊ 0⤋