Im working at a mini storage and drilled a hole in the wrong place the foreman gave the wrong measurement, so i was wondering if there is any way of fixing it.
2006-08-06 06:56:11 · 4 answers · asked by John 2 in Home & Garden ➔ Maintenance & Repairs
what gauge sheet metal is it. if it is 10-12 gauge just weld hole shut . then grind smooth again.
2006-08-06 07:04:28 · answer #1 · answered by Bighorn 4 · 0⤊ 0⤋
Solder... this is what you do: Get some thermal tape, a torch and some solder. Attach the thermal tape on one side of the hole, heat the hole and surrounding area, melt a little soldier on a brick or something that won't burn and smooth it over the hole with the thermal tape on the other side. It shouldn't take much.
2006-08-06 14:01:24 · answer #2 · answered by madbaldscotsman 6 · 0⤊ 0⤋
If it's just a drill hole I wouldn't worry about it. You might end up making it more noticable by fixing it.
2006-08-06 14:01:58 · answer #3 · answered by Amy >'.'< 5 · 0⤊ 0⤋
hang a picture over it.
2006-08-06 14:26:28 · answer #4 · answered by teabagme 3 · 0⤊ 0⤋