2006-08-03 03:53:16 · 5 answers · asked by Anonymous in Consumer Electronics ➔ Home Theater
Not sure what a phono lead is, but if it is what I think it is, then yeah you probably are getting pulsing and will continue to get pulsing until you disconnect it and wire it properly with the correct wire. Use video cable for one not audio cable.
2006-08-03 16:07:17 · answer #1 · answered by coco2591 4 · 1⤊ 0⤋
I am not sure what you mean by pulsing. It could be the projector that is the problem.
Keep the RCA cable you are using away from the power cord. Make sure the connections are tight. Try a different video source and see if the problem is still there. Try a different video monitor or projector and see if the problem is still there.
Trouble shoot all the pieces in your puzzle.
2006-08-03 14:13:49 · answer #2 · answered by sanjoseskater 2 · 0⤊ 0⤋
If your projector and video source has component video or S-video connections, then try using one of them (in that order) and do try to keep at least 6" spacing of power cables from your video cables.
2006-08-03 16:49:30 · answer #3 · answered by Peter W 2 · 0⤊ 0⤋
make sure the cables aren't close to any other cables. If so, then keep all cables at least 6" apart. Make sure the cables are shielded (it'll say so on the package).
2006-08-03 11:31:44 · answer #4 · answered by DynamoMan 4 · 0⤊ 0⤋
You should use video cable. Such cables are usually identified by having a yellow connector, while audio cables have red, white, or black connectors.
2006-08-04 01:29:36 · answer #5 · answered by gp4rts 7 · 0⤊ 0⤋