list of cable commonly used in transmission of electricity?

Question

i want to know the type of electrical cable commonly used in transmission of electricity.

Answer 1

The lines of high-voltage transmission systems are usually composed of wires of copper, aluminum, or copper-clad or aluminum-clad steel, which are suspended from tall latticework towers of steel by strings of porcelain insulators. By the use of clad steel wires and high towers, the distance between towers can be increased, and the cost of the transmission line thus reduced. In modern installations with essentially straight paths, high-voltage lines may be built with as few as six towers to the kilometer. In some areas high-voltage lines are suspended from tall wooden poles spaced more closely together.

For lower voltage distribution lines, wooden poles are generally used rather than steel towers. In cities and other areas where open lines create a safety hazard or are considered unattractive, insulated underground cables are used for distribution. Some of these cables have a hollow core through which oil circulates under low pressure. The oil provides temporary protection from water damage to the enclosed wires should the cable develop a leak. Pipe-type cables in which three cables are enclosed in a pipe filled with oil under high pressure (14 kg per sq cm/200 psi) are frequently used. These cables are used for transmission of current at voltages as high as 345,000 V (or 345 kV).

Answer 2

High tension wires are usually steel alloy or a copper alloy mix. Transmission cables can be hollow because high power travels along the skin of the conductor. It is called the 'skin effect'. Distribution cable can be aluminum, alloy, copper, or combinations of the above. Most all industrial, commercial, and residental wiring will be copper (with some aluminum, but I wouldn't use it).