stereo hook-up?

Question

i need to know the what the wire colors go for when hooking up a pioneer car stereo to a 91 chevy s-10. i have all the wires but they are not marked. the old stereo in the truck was cut out. any help? thanks.

i know which is the ground but i have a yellow and red wire and i need to know where they hook up. serious answers only please.

Answer 1

you need a wiring diagram, or you could pull out each speaker. look at the colors, then put them where they should go on the deck. The deck should be marked. Then just install the main power, and ground, and you should be good.

Answer 2

Left Front Spkr (-) Light Gray
Left Front Spkr (+) Tan
Right Front Spkr (-) Light Green
Right Front Spkr (+) Dark Green
Ground Wire Black
Not Used
Headlight Dimmer Wire Gray
Power Antenna Turn On Pink (if available)
+12 Volt Ignition Wire Yellow
+12 Volt Battery Wire Orange
Right Rear Spkr (-) Light Blue
Right Rear Spkr (+) Dark Blue
Left Rear Spkr (-) Yellow
Left Rear Spkr (+) Brown

Answer 3

get your self the right cord make certain the stereo is 12v or 24v searching on what ur truck is take one cord from the battery and about 3" from the battery get a fuse holder and fuse(get score depending on the 12v 24v bat) feed the cord to ther stereo that the posative carried out now make certain that the body is neutrall both a tester or a bulb adverse to the body ie nut or screw and contact the stay to the nulb could artwork and then from that aspect take a cord it incredibly is securly clamped to that area of the boby and take instantly to the stereo thats the neutrall carried out dont enable them contact or ya will ave a spark and want a sparkling fuse and thats it gooooood looook..........

Answer 4

http://www.installdr.com/InstallDocs/GM/PDF/460037.pdf

theres a site that has all the color codes and such for that model. Youll need adobe acrobat to open it though.

Answer 5

i willl hook it up for and and i can hook other things up to hahahaha