squire-bingham mod. 20 .22LR (very old made for Kmart)... i took off the stock and started w/ the bolt but can't figire it out. the lever that pulls the bolt back is in the way and i dont know how to take it off
2006-08-01 06:52:22 · 6 answers · asked by Sarge 1 in Sports ➔ Outdoor Recreation ➔ Hunting
most bolts come out by either safty on or off, pull trigger back to remove bolt. on semiautos you need to pull the bolt handle it self straight out the side.
2006-08-01 11:28:00 · answer #1 · answered by Jack's Q&* 7 · 0⤊ 0⤋
alright squires- bingham is the same thing as armscor or arms corporation of the phillipians. im not really all that familiar with the mod. 20 but i do have a model 1600r and with mine you have to unscrew the bolt on the very back end of the gun and remove it and the spring. then you have to take the lever on the bolt and just turn it back and forth until it come right out(big pain in the ***). then i just have to clean and reassemble. i e-mailed armscor and they sent me an online owners manual for my gun and they would probably do the same for you. by the way the mod. 20 is on there website.
http://www.armscor.com.ph/autorifle.htm
info@armscor.com.ph
sbci@pldtdsl.net
try these e-mail addresses and you can take a look at the gun on the website if you want. also when you e-mail them you might want to give a little more info on the gun and what your wanting to do. also if you give them the serial number they can tell you what year the gun was made. hope this helps a little bit.
2006-08-02 16:40:26 · answer #2 · answered by walker 3 · 0⤊ 0⤋
The model 20 the bolt is held in by the firing pin. Once you unscrew the back piece and remove the springs, the firing pin is free to moved back. The firing pin has a notch in it that when pushed back, about 3/4 of an inch, the notch lines up with the bolt handle, it pulls out very easy and the bolt slides out the back. Assemble is the same. I used a pipe cleaner to push back the firing pin, a straighten out paper clip works as well. Hopes this helps.
2013-10-25 02:36:15 · answer #3 · answered by Anonymous · 0⤊ 0⤋
hi there , im not familiar with this rifle, but try this, grasp the lever and pull straight out, some of the older shot guns worked this way
2006-08-01 11:11:24 · answer #4 · answered by burnie_1_2000 4 · 0⤊ 0⤋
read the manual, if you still have it. It should give a diagram on how your gun is put together. If you can't figure it out, then take it to a gunsmith.
2006-08-01 07:14:15 · answer #5 · answered by esugrad97 5 · 0⤊ 0⤋
how to put the laver that pull the bolt back in
2015-02-26 10:56:18 · answer #6 · answered by EDDIE & GENEVA 1 · 0⤊ 0⤋