English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

it only started doing it one day ..never had a prob before ..takes good pics indoors .but they are really bright and a slight blur occurs when i take a pic outside ...any help would be very much appreciated... thanx

2006-08-01 00:52:53 · 6 answers · asked by paddy 1 in Consumer Electronics Cameras

6 answers

Maybe you (inadvertently) changed a setting. I can think of three things that would cause your pictures to come out too bright:
* If you've set the camera to fully manual (M), in stead of letting the camera measure the correct exposure. Most cameras have a PASM dial: P(rogram does it all), A(perture priority), S(hutter priority), M(anual).
* If you have an 'ev' setting to adjust the exposure meter, and you've set the ev to any value bigger than zero. Zero is the default.
* A manual white balance setting. Set it to Automatic.
Check these first; it could also explain the slight blur you're getting.

2006-08-01 01:19:59 · answer #1 · answered by OMG, I ♥ PONIES!!1 7 · 1 1

A few questions to ask:
Does the camera have setting for?
Exposure compensation
Gamma
Manual or auto settings
If you have locked the exposure compensation to + it will give bright images the higher the exposure comp no. the brighter the image.
Gamma settings are another way of brightening or darkening a pic. set it to 1
have you got the shutter speed set too slow?
Have you got the aperture set too wide?

2006-08-01 01:54:13 · answer #2 · answered by n 5 · 0 0

Set the ev (Exposure value) back to zero, the maximum ev+ is +2.0 and the lower ev- is -2.0. If ev toward + , the picture will became brighter.

2006-08-01 01:29:48 · answer #3 · answered by Anonymous · 0 0

some very particular contacts which have stepped forward into genuine existence friendships, my appropriate lady friend and that i met the following over 6 years in the past now and we've maintained a lengthy distance friendship.

2016-11-27 05:43:18 · answer #4 · answered by ? 4 · 0 0

Exposure and/or Aperture.
Maybe even shutter speed.

2006-08-01 00:56:20 · answer #5 · answered by JeffE 6 · 0 0

adjust the white balance

or u have 2 go 2
http://fujifilm.com/products/finepix_a405/userguide

2006-08-01 01:09:14 · answer #6 · answered by Anonymous · 0 0

fedest.com, questions and answers