2006-07-31 09:04:32 · 4 answers · asked by feet 1 in Consumer Electronics ➔ Other - Electronics
You may be able to get your hands on an evaluation board from the manufacturer of the switch.
2006-07-31 09:07:44 · answer #1 · answered by ♥ Luveniar♫ 7 · 0⤊ 0⤋
You need a voltage source, approximately equal to the coil's operating voltage, and a multimeter.
You then need to identify which of the five connections are what.
Two of them will be to the coil which will have a resistance of between several tens of ohms and several hundred ohms, perhaps even more.
The other three will almost certainly be a set of change-over contacts.
One of those is the moving, or common, contact.
There will be continuity (zero ohms) between the common contact and one of the other contacts when the relay is not energised, and there will be continuity between the common contact and the other one when it is energised.
2006-07-31 10:06:16 · answer #2 · answered by dmb06851 7 · 0⤊ 0⤋
my husbands a electrician
2006-07-31 09:08:55 · answer #3 · answered by sunistao 3 · 0⤊ 0⤋
put it up to your tongue
2006-07-31 09:07:57 · answer #4 · answered by skinny_nicci2 2 · 0⤊ 0⤋