any help with trouble shooting so we can repair ourself would be appreciated,thanks.
2006-07-31 08:05:23 · 4 answers · asked by miss knowitall 1 in Cars & Transportation ➔ Car Makes ➔ Ford
Check for a bad Fuse First. Check your manual for location of fuses and which fuse goes to the windowmotor, easliy fixed. If that isnt it you probably have a bad Motor inside the door which is Tougher to fix but you can probably get a used one at the junk yard for about 25 dollars :-) Good Luck
2006-07-31 08:09:56 · answer #1 · answered by D B 4 · 0⤊ 0⤋
Ford has had allot of problems with the motor itself, the brushes for some reason get corroded. if you know right where the motor is you can use a thin piece of metel , but just take the door panel off, becarful they hide screws and clips in odd places take your time . Then plug your switches back in and tap on the motor while pressing the swicth it should work. you can do this a few times and reassemble but might fail again so if you can replace it while you got it apart.
2006-07-31 08:13:43 · answer #2 · answered by home improvement at its best 5 · 0⤊ 0⤋
Most of the time it's the motor. Hold the button down on the window that doesn't work and slam that door a couple of times, it might start working. They usually get stuck, if its not the motor it could be the window regulator. That's if it is just one motor.
2006-07-31 12:32:29 · answer #3 · answered by kayef57 5 · 0⤊ 0⤋
It is a ford. Some good answers here.
2006-07-31 10:37:17 · answer #4 · answered by Anonymous · 0⤊ 0⤋