2006-07-30 16:46:33 · 8 answers · asked by eyap2 2 in Science & Mathematics ➔ Engineering
The size of a M10 nut depends on the type of the nut. For example, a ISO/ANSI pattern hexagonal M10 nut is 8mm thick, and distance between parallel sides is 16mm and between opposite vertices is 18.48mm.
2006-07-30 18:57:20 · answer #1 · answered by Sourabh 3 · 1⤊ 0⤋
Lots of wrong info here. An M10 nut is not the same as a 10 mm nut which is 10 mm across the flats. M10 refers to a metric thread, nominal dia 10 mm so the nut will be significantly larger across the flats. There is undoubtedly a standard size for an M10 but I do not have the standards here - probably about 16mm aross the flats
2006-07-30 22:33:38 · answer #2 · answered by Peter T 2 · 0⤊ 0⤋
The major diameter of the threads on a screw that would fit said nut is 10 mm
2006-07-31 16:27:31 · answer #3 · answered by Answer Master Dude 5 · 0⤊ 0⤋
It's 10 millimeters. The only difference would be the threads.
2006-07-30 16:51:30 · answer #4 · answered by maxwell3030 2 · 0⤊ 0⤋
if it is a hexagonal nut, that means it is 10mm across. YOu have to measure the distance between the two parallel sides. It should be 10mm.
2006-07-30 18:02:25 · answer #5 · answered by cooler 2 · 0⤊ 0⤋
as compared to standard 7/16" head or measured threads to standard??we're talking metric here so what's the problem?
2006-07-30 16:55:56 · answer #6 · answered by Anonymous · 0⤊ 0⤋
10 mm.
2006-07-30 16:49:58 · answer #7 · answered by Anonymous · 0⤊ 0⤋
Big.
2006-07-30 16:49:41 · answer #8 · answered by Anonymous · 0⤊ 0⤋