replace the antenna on a 2000 ranger?

Answer 1

If you have to replace the entire assembly you're going to need to remove the R/F wheel and peel back the wheel well. Unbolt the antenna assembly and remove (the wire and all should come out). If you're just replacing the mast use a 10mm open end wrench, be sure not to overtighten it's real easy to snap them things. I work at a ford dealership. Good luck

Answer 2

What are you wanting to know, be more specfic, Is it just the mask? then take a 10mm wrench and unscrew it. If its the lead then remove mask, then cover and the screws, remove the radio and glove box and tie the new one to the old one and pull it out where the ant. is