Cordless phone problem?

Question

I have a Uniden TRU246 cordless phone that I've had for awhile. I replaced the battery about a month ago, and it was working fine until about an hour ago. The phone went dead, and when I placed it on the base unit to recharge, the base unit recharge light blinks instead of just staying on. Any ideas on the cause of the sudden problem. Of course, the "Troubleshooting" part of my users manual gives me no info. Thanks!

Answer 1

It's dead. Uniden phones have a nasty way of dying, all of a sudden. I had a different model several years ago (900MHz), and when I replaced the battery, it stayed dead. I replaced that battery and it came back to life for 14 seconds.

Answer 2

Try cleaning the metal contacts on the phone and base unit that touch together when you place the phone on the base unit. These contacts connect the base unit power supply to the battery in the phone. Spray contact cleaner works best (available at Radio Shack/Circuit City and other stores) but you could try varsol or rubbing alcohol. Also make sure these contacts are working properly (they sometimes are spring loaded and if the springs stick then the metal does not make contact).

Answer 3

you additionally can evaluate contacting the telephone employer and have them pop out and verify the strains. this is a possibility there may well be a tree limb on the line, water interior the line or it ought to no longer be creating an excellent connection to the telephone container no count if this is on your end or there is.

Answer 4

The battery might not be connected securely. It could also be a defective battery.

Answer 5

Call the customer service number and see... If it's getting old, you just may need to get a new one.

Answer 6

新しいコードを買うべきです。

Answer 7

sure everyone with scanners can hear your conversations