What is ESD?

Question

How to use it?

Answer 1

Electro-Static Discharge! Basically, everything builds up a static charge when in motion. Then something with a positive charge gets near something with a negative charge, the positive and negatives try to balance each other out. The resulting exchange (usually a spark or lightning bolt in the case of a thunderstorm) is called electro-static discharge. Even small discharges (sparks you can't even SEE!) can ruin sensitive electronics components.

Answer 2

Electrostatic discharge (ESD) is the transfer of an electrostatic charge between two objects. This is a very rapid event that happens when two objects of different potentials come into direct contact with each other. One of the main causes of device failures in the semiconductor industry is ESD.

Charging results in one object gaining electrons on its surface area to become negatively charged. The other object loses electrons from its surface area and becomes positively charged. The small electric shock you may receive from certain objects happens when you become triboelectrically charged.

Triboelectrical charge is the term used for an electron transfer resulting from two objects coming into contact with each other and then separating. This may happen by simply walking across a room. Different materials you come into contact with may cause you to become either positively or negatively charged.

Failures caused by ESD can happen in a number of different ways. The failure can exhibit one or more of the following signs: a short or burnout, resistor/metal fusing together a junction leakage, and a resistor-metal interface rupture. There are three major categories of ESD prevention or control. One is the prevention of a static-charge build up. The next is the safe dispersal of any charge that has built up, while the third is to improve the ESD robustness of the product causing the ESD.

Preventing a charge works on the theory of eliminating materials that have a higher tendency towards the build up of ESD in the workplace. All equipment should be free of moving parts that can cause such build up, such as rubber rollers and plastic stoppers. The use of ionizers to neutralize newly generated charges also prevents charges from building up.

Grounding is one of the most important factors towards eliminating ESD. For example, in the workplace, there should be only one common ground. There should be suitable provisions made for the electrical path of charges to the ground. Any charge that has built up will be dissipated by a good grounding system. Everything in the production line, equipment, and worktables should be connected to this common ground.

Having a single common ground will ensure that everything on the workplace floor remains at the same potential. If the workplace has conductive flooring, then it should be connected at regular intervals to this common ground. Conductive shoes, along with properly grounded wrist and foot straps, will also bring any charge to the common ground. The workplace should also have personnel properly trained in ESD precautions. A training scheme should be in place to make staff aware of the company's ESD policies, and regular audit for ESD control compliance is essential.

Answer 3

Electrostatic discharge (ESD) is the sudden and momentary electric current that flows when an excess of electric charge, stored on an electrically insulated object, finds a path to an object at a different electrical potential (such as ground). The term is usually used in the electronics and other industries to describe momentary unwanted currents that may cause damage to electronic equipment.

Answer 4

ESD is "Emergency Shut Down" usually a RED mushroom head stop button that is retained when pressed.
ESD systems are incorporated into almost all engineering designs for controls for oil/gas/power plant control systems.
They are also installed on cranes/elevators and almost anywhere where in an emergency they can be pushed to shut down the offending equipment.