i have a 40 hp elect motor and i need to remove the pulley off of the old shaft to place on the new shaft of the new motor
2006-07-20 14:15:41 · 7 answers · asked by mark s 1 in Consumer Electronics ➔ Other - Electronics
A gear puller works well.
2006-07-20 14:24:13 · answer #1 · answered by Anonymous · 0⤊ 0⤋
You do need a puller. It has two arms which will grab the pulley on the outside diameter, you tighten a bolt which pushes against the shaft. Off to the auto parts store with you now, and bring five or ten bucks.
2006-07-20 14:24:14 · answer #2 · answered by Don 6 · 0⤊ 0⤋
heavily you may desire to maintain on with equivalent stress to the two aspects of the pulley. you will possibly desire to purchase a pulley puller that grabs and pulls the two aspects of the pulley jointly as pushing down on the top of the shaft. you in simple terms turn the cope with and the pulley comes up. (i might recommend spraying slightly WD-40 on it first) in case you do not choose to purchase the puller.....you may lever the two aspects with long screwdrivers....yet, pay attention which you do not destroy the pulley or bend the shaft. may well be nicely truthfully worth the cost of the puller.
2016-11-02 10:43:32 · answer #3 · answered by ? 4 · 0⤊ 0⤋
I have an Air Conditioning business, when the pulley, or fan blade hub won't budge, heat the area with a torch, acetylene, then cool. It will slide right off.
2006-07-20 14:22:33 · answer #4 · answered by thommazac 1 · 0⤊ 0⤋
quit watching porn.. hehe..
get it? remove pulley from the shaft? get it?
ehh nevermind
2006-07-20 14:19:28 · answer #5 · answered by Anonymous · 0⤊ 0⤋
You need a puller!
2006-07-20 14:17:44 · answer #6 · answered by Jimmy Pete 5 · 0⤊ 0⤋
get back to me on that
2006-07-20 14:17:32 · answer #7 · answered by ? 6 · 0⤊ 0⤋