2006-07-15 06:56:32 · 6 answers · asked by clueless 1 in Sports ➔ Outdoor Recreation ➔ Hunting
You do NOT have to remove the trigger group...refer to the online owner manual...
With it unloaded and the safety on (to prevent the hammer from dropping once the bolt is out), unscrew the forend cap and take the forend off and take the barrel off... Slowly close the bolt holding it back with your hand and pushing the carrier release so the bolt doesn't slam... Pull the handle out -- also, take the rubber gasket and seal off the magazine tube. Reach inside the bottom feed door and on the side you'll feel a shell stop clip sticking out a little. Press the clip, and holding the clip down, use the other hand, start to pull the piston assembly out, and the bolt will be on top.
Simple as that. To put back together, reverse the process.
2006-07-15 09:44:29 · answer #1 · answered by DT89ACE 6 · 1⤊ 0⤋
Remington 1100 Trigger Assembly
2016-12-26 16:04:25 · answer #2 · answered by suzette 3 · 0⤊ 0⤋
Remington 1100 Disassembly
2016-11-01 08:27:25 · answer #3 · answered by ? 4 · 0⤊ 0⤋
This Site Might Help You.
RE:
how do you remove the bolt from a remington 1100?
2015-08-19 04:53:35 · answer #4 · answered by Han 1 · 0⤊ 0⤋
You have to remove the trigger group. There are two pushpins that secure the trigger group in the action. Better yet go to the links below.
2006-07-15 07:09:12 · answer #5 · answered by gitalonglildoggies 1 · 1⤊ 0⤋
easy listen to the guy before me he knows what he talking about
2006-07-15 10:42:32 · answer #6 · answered by Anonymous · 0⤊ 0⤋
you wanna shoot your mother-in-law?
2006-07-15 06:59:56 · answer #7 · answered by Anonymous · 0⤊ 0⤋
bolt?
u have no clue wut ur talkin about do u?
2006-07-17 09:48:15 · answer #8 · answered by outdoorsman 69 2 · 0⤊ 0⤋