I bought a new Ignition Control Module and I can not locate to old one to replace it. Autozone said it was in the engine compartment on the rear of the driver's side wheel well, but i have not found anything on the wheelwell that looks like it.
Any ideas?
2006-07-10 02:24:21 · 4 answers · asked by Daniel H 1 in Cars & Transportation ➔ Car Makes ➔ Ford
I bought the part form Autozone and looked in the location they indicated on their website.
2006-07-11 09:13:04 · update #1
The ignition control module is integrated within the powertrain control module. It is not a separately replaceable component.
Description and Operation
Notes
PURPOSE
* The Ignition Control Module (ICM) is incorporated within the Powertrain Control Module (PCM) . The ICM receives engine position and speed information from within the crankshaft position sensor and desired spark advance information from the PCM.
OPERATION
* The ICM synthesizes a profile ignition pick up signal and ignition diagnostic monitor signal for use within The PCM.
* The PCM uses this information to determine which ignition coil to fire, calculating the turn ON/OFF times of the ignition coil required to achieve the correct dwell and spark advance.
What's wrong with your car?
2006-07-10 02:31:11 · answer #1 · answered by Magikmann 4 · 0⤊ 0⤋
UNDER HOOD, DRIVER SIDE, UPPER ENGINE AREA, MOUNTED ON REAR OF FENDERWELL
http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/17/26/98/0900823d80172698.jsp
2006-07-10 10:24:44 · answer #2 · answered by retired_afmil 6 · 0⤊ 0⤋
call the part dept of your local ford dealer and they will direct you to it make sure you have the correct part and it wll take care of the problem that you are replacing it for
2006-07-10 11:55:54 · answer #3 · answered by ogdad223@yahoo.com 2 · 0⤊ 0⤋
To the right of the master cylinder
2006-07-10 16:05:54 · answer #4 · answered by GFYpartyboy 2 · 0⤊ 0⤋