Do i really need an amp when hookin up two 8 inch speakers to my back seat speakers? I need answers fast.?

Question

Anybodys input will help out alot.Thanks

Answer 1

being that they are 8" i would say... it would be a good idea. saying that they are either full range , or woofers. if you don't want distortion from being under powered , there is no way your head unit could supply enough to properly drive them, even cheap ones

Answer 2

http://spkrbox1.spaces.msn.com/ for real "sound" advice.

Your system won't mean squat without a well designed box to put your subs in. Some manufacturers have recommendations as to dimensions of various types of boxes. It is best to find someone who builds boxes if you go with something other than a sealed box.

You should always match up RMS (Root Mean Square) watts of Subs and amp per channel as well as impedance's(resistances). When a sub has rating of 600 Watts MAX it really has an RMS rating of about 200 Watts RMS. RMS is the nominal wattage your most likely going to get out of it. Remember, a 200 Watts RMS amplifier has more power output than a 200 Watt MAX.


If your amp is rated at 4Ω don't subject it to 2Ω, it will fry.

Here is the formula for subs in parallel:

Z = 1 / (1/sub1 + 1/sub2 + 1/sub3 + ....)

For series, just add them up (sub1 + sub2 + ...).

You can mix and match these equations to get the right impedance required by your amp.

Example 1: Amp is 2 channel and rated at 4Ω, 4 subs @ 4Ω each. If I connect two in parallel and the other two in parallel and connect the two pairs in series, I would have a total impedance(resistance) of 4Ω. So to the amp, it's just one sub.

Example 2: Amp is rated at 1Ω mono, 2 subs @ 4Ω each dual voice coil. If I connect two voice coils in parallel and the other two voice coils in series and connect the two subs in parallel, I would have a total impedance of 1.6Ω. Which would be perfect for a 1Ω stable mono amp.

You should use a capacitor as well.

Recommend for every 500 watts MAX you use a .5 Farad cap
Example: 1000 watts MAX - 1 Farad cap

You will also need what's called a "line level converter" if your stock head unit doesn't have RCA outputs or your amp doesn't have high-level inputs.

Try http://www.soundomain.com/shop you can find some really good deals, and this site is manufacturer certified. VERY IMPORTANT WHEN SHOPPING ON-LINE!!!

If you like I can send you some plans for reference. My plans are for a 4-th order band-pass bass box (A.K.A. bass-reflex) that holds two 12's.

Also included are java calculators you can use to figure parallel and series values given Ω values, tips on box building and types, calculating port diameter and length(if used), calculating box dimensions for types of boxes (sealed, wedge, cylindrical, etc.), materials needed and even how to make a jig for cutting perfect holes for your subs.

Just e-mail me [e-mail]

My system

Blaupunkt TSw1200 subs with a Sony Xplōd XM2200GTX.
My amp is 1200 watts (200 Watts RMS X 2), subs are 600 watts (200 Watts RMS) each, cap is 1.5 Farad

SPL is about 112 db each sub

Total cost(so far) = $410

Answer 3

Every subwoofer on earth has to have an amplifier, period. The least amount of power you should give an 8" sub is 50 watts RMS, but 75-100 watts RMS would be much better (for the sub).

Answer 4

you will definately want one.
hook the 2 rear 8" speakers to a "small" amp
hook the front 2 to your deck

that way your front speakers will get double sound and your rears will boom.

Answer 5

you don't need an amp. but a small amp would bring the speaker to they're potential.

Answer 6

if you want to keep your stereo intact, i would sujest you get an amp. you could burn out the audio channels on the deck.

Answer 7

no if speakers are rated more than out-put hook them up