2006-07-08 08:46:04 · 12 answers · asked by Boom 4 in Cars & Transportation ➔ Safety
Get that stuff at the store for unsticking Superglue from your fingers. Use plenty of that and a razorblade scraper to get it loose. Clean up well with oil-free nail polish remover and rubbing alcohol before you reattach it.
2006-07-08 11:05:05 · answer #1 · answered by Bostonian In MO 7 · 0⤊ 0⤋
flow to vehicle Zone and purchase the equipment and persist with the guidelines. This works very properly basically be sure which you do no longer tighten the allen set screw too tight because it is going to pull the section off of the winshield lower back.
2016-12-14 05:38:54 · answer #2 · answered by ? 4 · 0⤊ 0⤋
done the same thing, take a butter knife and insert it side ways underneath and slowly work it back and forth. It will give way after a bit.
Aye, like he said above, if you have a paint scraper, its so thin, it would be ideal, anything thin and flat to get under it.
2006-07-08 08:53:02 · answer #3 · answered by AdamKadmon 7 · 0⤊ 0⤋
Bite the bullet and take it to the garage. They can fix that in a jiff.
2006-07-08 09:36:38 · answer #4 · answered by Anonymous · 0⤊ 0⤋
trya thin paint scraper it will probably pry right off
2006-07-08 08:52:18 · answer #5 · answered by MONTY s 1 · 0⤊ 0⤋
use nail polish remover or a blow dryer
2006-07-08 08:53:18 · answer #6 · answered by us veteran 2 · 0⤊ 0⤋
Spin it around.
2006-07-08 19:41:07 · answer #7 · answered by Beavis Christ AM 6 · 0⤊ 0⤋
hehe thats really funny
2006-07-08 09:34:37 · answer #8 · answered by Anonymous · 0⤊ 0⤋
try engine cleaner/de greaser then a razor.
2006-07-08 09:01:00 · answer #9 · answered by jr joker 1 · 0⤊ 0⤋
TRY NAIL POLISH REMOVER
2006-07-09 02:41:28 · answer #10 · answered by skyianna3 1 · 0⤊ 0⤋