2006-07-06 15:54:09 · 5 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
i assume 4 wheel drive
it is verry heavy but here it goes
drain trans and transfer case remove both drive lines un hook selector switch and vacuum hose remove cross over bar remove 4 bolts that hold the flywheel to torque converter remove the 6 bolts that hold trans to engine
and let her drop
put back in in reverse
make sure the torque converter is full of fluid and pushed in all the way turn 3 times while pushing in
it will drop 3 times
2006-07-06 16:12:49 · answer #1 · answered by mobile auto repair (mr fix it) 7 · 0⤊ 0⤋
unbolt the drive shaft, unbolt the crossmember, dissconnect the transmission lines, lower the rear of the transmission, (witch will also tilt the engine) unbolt it from the engine,(should be 6 bolts)
pull
2006-07-06 23:04:16 · answer #2 · answered by piopo 3 · 0⤊ 0⤋
Bring it to a mechanic!!
2006-07-06 22:58:12 · answer #3 · answered by Saylor-girl 2 · 0⤊ 0⤋
take it to your favorite mechanic
2006-07-06 23:46:17 · answer #4 · answered by Gabby_Gabby_Purrsalot 7 · 0⤊ 0⤋
very very carefully
2006-07-06 22:59:31 · answer #5 · answered by john doe 2 · 0⤊ 0⤋