craftsman chain drive
lost the manual
2006-07-06 11:14:23 · 3 answers · asked by dns6181 1 in Home & Garden ➔ Maintenance & Repairs
If your garage door opener has a "Smart" button on the overhead unit, then programming is easy. Press and release the Smart button. A small LED light will glow next to the button. Within 30 seconds, go to the keypad (easiest to do with the door open, of course), type in the 4 digit code you want to use, and hold the Enter key. When it successfully programs, the light bulbs on the overhead unit will flash off and on, and 2 "clicks" will be heard. Let go of the Enter key, wait for the lights on the keypad to go out, and test your new code.
2006-07-06 23:32:16 · answer #1 · answered by Opener Guy 3 · 0⤊ 0⤋
This will be easy. The directions you need are located on the back of the opener. You will have to get on a step ladder and you might need glasses to see them but they are there right on the back side.
2006-07-06 12:35:23 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Make sure the "dip" switches on the remote and the drive are EXACTLY the same setting or it will Not work!! ;-)=
2006-07-06 15:22:22 · answer #3 · answered by Jcontrols 6 · 0⤊ 0⤋