I dont know any great way. This should get it eventually:
1. Strip off top layers with common stripper.
2. Try to get to crannies using very strong stripper or solvent and brush. Goof off works fast. Depending on shape of stone and mortor, this might get it sufficiently.
3. If too much still remains, sand blast. You might be able to contract out or rent equipment.
2006-07-05 21:11:37
·
answer #1
·
answered by schester3 3
·
6⤊
3⤋
With great care as, before the 1970s paint contained lead, which is highly toxic. You must protect yourself with a mask, gloves and goggles if you are doing this sort of work yourself. Perhaps the best bet (if you're set on doing it yourself rather than getting someone in) is to buy a thick 'paste' which you apply, leave and peel off. I think Nitromorse (?) do something which might work, but check the lable as it may not be suitable for stone.
DON'T SCRATCH OR SCRAPE WITHOUT PROTECTION!!
2006-07-05 21:38:41
·
answer #2
·
answered by Roxy 6
·
0⤊
0⤋
i would use a paint stripper called black friars not as severe as some of them on the market and doesnt have to be neutralised after using it try to do a test on part of the fire you cant see its only a mild acid so it wont do the stone any harm use a wire wool not a wire brush this is a lot gentler
2006-07-06 03:46:28
·
answer #3
·
answered by bojomarriott 4
·
0⤊
0⤋
Sand Blaster
2006-07-05 21:09:19
·
answer #4
·
answered by bigjarom 4
·
0⤊
0⤋
will i was a 1 n its not hard all u do
if go 2 a strip school n then u go from there
u do get money that can pay 4 that
but hav fun doin it u will
2006-07-05 21:10:39
·
answer #5
·
answered by Jazzy 2
·
0⤊
0⤋
To be honest I would try to find an expert in restoration and ask their advice, the last thing you want to do is damage an antique fire place.
2006-07-05 21:10:22
·
answer #6
·
answered by ehc11 5
·
0⤊
0⤋
Scratch the surface with a wire brush and use brick acid or patio cleaner and repeat til it shines like a new button
2006-07-05 21:11:30
·
answer #7
·
answered by Mark P 2
·
0⤊
0⤋
Nitromores... ( but watch your eyes ).... it may take a few coats but it works.... after this use a sander ( Heavy grade paper )to get a nice finish.
Or a Sand blaster but thats a bit harsh and very messy...
2006-07-05 21:29:02
·
answer #8
·
answered by Anonymous
·
0⤊
0⤋
Paint stripper. Also good for DIY actions on the cars of your enemies.
2006-07-05 21:13:32
·
answer #9
·
answered by Kango Man 5
·
0⤊
0⤋
sand blaster (they have smaller home use units and instruction on how to use them at many builders equipment rental firms)
IT'S THE ONLY WAY YOU'RE GONNA GET THIS DONE--TRUST ME
2006-07-05 21:11:00
·
answer #10
·
answered by Anonymous
·
0⤊
0⤋