Okay I know 1st you dust/sweep it, then you put floor cleaner on it... but why does teh streaks happens afterwards when i put re finisher on it ..almost like sticky guck.....hopefully I asked this correctly.
2006-07-04 12:07:53 · 3 answers · asked by Jus me 2 in Home & Garden ➔ Cleaning & Laundry
try using a pad instead of a brush or if you are good at diy use an air gun
2006-07-04 12:10:19 · answer #1 · answered by stu110185 1 · 0⤊ 0⤋
I'm not sure about "re-finisher". Are you speaking of "stain"?
Are you speaking of "wax"?
If you are re-waxing, you must remove the old wax. This is the biggest mistake people make. Wax over old wax.
Re-staining requires sanding.
If you are using "floor cleaner", is it only removing dirt? Not wax?
Check with a wood dealer. They should have brochures available and the correct products.
2006-07-11 08:02:51 · answer #2 · answered by ed 7 · 0⤊ 0⤋
depends on the original finish, oil based refinishers on oil base water based on water finishers, unless you had some one use a polyurethane finish on the floor and in that case whatever you use will leave streaks and goo
2006-07-04 19:15:03 · answer #3 · answered by gacohio@sbcglobal.net 2 · 0⤊ 0⤋