I have a Sony DVP-NS400D. When I insert a dvd the display says 'no disc'. I'm using genuine bought dvds from the correct region (discs it used to play ok). It recognised and played a head cleaning disc no problem. Can anyone tell me what might be wrong?
2006-07-04 08:05:10 · 13 answers · asked by Rust Bunny 2 in Consumer Electronics ➔ TiVO & DVRs
Simple solution: Clean the lens inside the player
Otherwise, buy a new one
2006-07-04 08:09:55 · answer #1 · answered by alchemthis 2 · 1⤊ 1⤋
Try changing the setting from NTSC to PAL or MULTI or the other way around. I get the same problem with a couple of discs i brought but not with the same make of player. I actually have a couple that can take me about 20 mins of chopping and changing to get to play. Very annoying and end up playing disk on computer most the time.
2006-07-04 08:12:17 · answer #2 · answered by willowbee 4 · 0⤊ 0⤋
Silly question, but, are the DVD's right side up?
It's a common problem, especially nowadays since the manufacturers don't take as much care to label the DVDs as before.
2006-07-04 08:09:57 · answer #3 · answered by J.D. 6 · 0⤊ 0⤋
I would suggest going into Control panel, and look through, advanced, then device manager...it will say if there is a problem when you look at the Sony device. When the computer starts up press F2 or DEL or what ever your computer needs to get into the bios setup. Look through the settings and see if there is a cd listed. If not you need to enable it!
2006-07-04 08:21:45 · answer #4 · answered by Anonymous · 0⤊ 0⤋
For some reason your dvd player isn't reading the disk. Maybe the disk is scratched or something.
2016-03-27 03:48:08 · answer #5 · answered by ? 4 · 0⤊ 0⤋
the problem is sony sucks go and by a different make of dvd player.
2006-07-04 08:14:36 · answer #6 · answered by Anonymous · 0⤊ 0⤋
did u burn the DVD or did u buy it from a store if you burned it, it wont work because your DVD player cant read its format
2006-07-04 08:10:52 · answer #7 · answered by kyle 3 · 0⤊ 0⤋
Take your DVD player back - it sucks.
2006-07-04 08:08:25 · answer #8 · answered by Rio 2 · 0⤊ 0⤋
it was probably not inserted all the way. make sure it is and it will turn on
2006-07-05 02:59:20 · answer #9 · answered by Anonymous · 0⤊ 0⤋
throw it against the wall and see if it helps, if not at least you know it is definitely broken!
2006-07-04 08:10:26 · answer #10 · answered by carolyn s 3 · 0⤊ 0⤋