English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I am restoring a 75 trans-am with a 400 pontiac engine. I went to bolt the Transmission to the bell housing and discovered the main gear shaft will not reach the pilot bushing. I am using A saginaw 4-speed, the bell housing has the double starter cone. What could Be My Problem?
face of bellhousing to pilot bushing 5 7/8"
face of transmition to end of main gear shaft 51/2
this leaves me about 5/8" short
I cant find any specs on the length of my maingear shaft

2006-07-04 06:14:29 · 3 answers · asked by Anonymous in Cars & Transportation Car Makes Pontiac

3 answers

Try Viagra.

2006-07-07 17:14:43 · answer #1 · answered by Anonymous · 0 0

You may have either the wrong bell-housing, or the input shaft is the wrong length. What did the trans come out of???

2006-07-04 13:27:58 · answer #2 · answered by dathinman8 5 · 0 0

try a chevy bellhousing if you can find one

The saginaw you have ,where did it come from???
maybe an old Chevy Vega..??

2006-07-04 13:29:58 · answer #3 · answered by Vulcan 1 5 · 0 0

fedest.com, questions and answers